Watercooling noooob

GingeUK · 15 Dec 2011 at 11:32

This pump -
http://www.overclockers.co.uk/showproduct.php?prodid=WC-004-SW&groupid=962&catid=2141&subcat=2142

This pump top -
http://www.overclockers.co.uk/showproduct.php?prodid=WC-059-EK&groupid=962&catid=2141&subcat=2143

????

Mightycamels · 15 Dec 2011 at 11:36

No this pump top -
http://www.overclockers.co.uk/showproduct.php?prodid=WC-057-AC&groupid=962&catid=2141&subcat=2143

GingeUK · 15 Dec 2011 at 11:39

Whats the purpose of the pump top? Is it so i can attach the compression fittings?

Mightycamels · 15 Dec 2011 at 11:41

Yea that and it increases flow. This has the pump you mentioned and a top already fitted http://www.overclockers.co.uk/showproduct.php?prodid=WC-030-OE&groupid=2180&catid=2182&subcat=

GingeUK · 15 Dec 2011 at 12:06

Is that one the same as the one i was looking at but as a combi?

Mightycamels · 15 Dec 2011 at 12:30

Yea, only £10 more and already assembled I believe.

GingeUK · 15 Dec 2011 at 12:36

https://www.overclockers.co.uk/showproduct.php?prodid=WC-080-EK

That's the CPU block i was looking at, Seem okay?

Mightycamels · 15 Dec 2011 at 15:14

Yep, I don't think you can go to far wrong with EK stuff.

Cleeecooo · 15 Dec 2011 at 16:05

GingeUK said:
https://www.overclockers.co.uk/showproduct.php?prodid=WC-080-EK

That's the CPU block i was looking at, Seem okay?

yep. If looks don't concern you, you can save £10 by going for a plexi top. The full nickel doesn't add any temp improvements, just looks nicer (in some peoples' opinions)

GingeUK · 16 Dec 2011 at 08:56

Will i need any ... OcUK Value Double Nipple G1/4" to G1/4" with O-Ring?

GingeUK · 16 Dec 2011 at 09:02

So so far i have got these, what am i missing?

Pump -
http://www.overclockers.co.uk/showproduct.php?prodid=WC-030-OE&groupid=2180&catid=2182&subcat=

Res -
https://www.overclockers.co.uk/showproduct.php?prodid=WC-008-EK

Compression x8 -
https://www.overclockers.co.uk/showproduct.php?prodid=WC-011-FO

Tubing -
http://www.overclockers.co.uk/showproduct.php?prodid=WC-031-XS

CPU Block -
https://www.overclockers.co.uk/showproduct.php?prodid=WC-012-EK&groupid=962&catid=1519&subcat=

I have got a fan controller, fans and rad!

Thanks for all the help so far, might actually get this finished

So what else do i need apart from water

Mightycamels · 16 Dec 2011 at 09:15

A winning attitude!

Mightycamels · 16 Dec 2011 at 09:19

The double nipple you mentioned means you could attach your Res straight onto you pump but with the D5 its probably better to have some tubing.

Your tubing doesn't match your compression fittings, you need 1/2 inner and 3/4 outer. http://www.overclockers.co.uk/showproduct.php?prodid=WC-052-OE&groupid=962&catid=1530&subcat=1777

Good luck and put some pics up when you are done.

GingeUK · 16 Dec 2011 at 10:13

http://www.overclockers.co.uk/showproduct.php?prodid=GX-020-PN&groupid=701&catid=1914&subcat=1812

http://www.overclockers.co.uk/showproduct.php?prodid=WC-139-EK

Graffics card and block

Thoughts?

Oh and this fluid okay?

http://www.overclockers.co.uk/showproduct.php?prodid=WC-009-MH&groupid=962&catid=1531&subcat=

Mightycamels · 16 Dec 2011 at 10:33

Card and block look good, maybe go for CPU only and then when you are more comfortable with it add the card.

That fluid looks awesome, I think you might have to replace it a bit more regularly than distilled water. There is a thread all about it here somewhere.

GingeUK · 16 Dec 2011 at 11:12

Well it depends what i get for Xmas really

If i get a card then ill add it straight away! Fluid does look cool, the only thing is ill never see it lol...Was debating swapping the res for one in the front but then the lights would annoy me

Thanks for all your help BTW

Cleeecooo · 16 Dec 2011 at 16:48

GingeUK said:
So so far i have got these, what am i missing?

Pump -
http://www.overclockers.co.uk/showproduct.php?prodid=WC-030-OE&groupid=2180&catid=2182&subcat=

Res -
https://www.overclockers.co.uk/showproduct.php?prodid=WC-008-EK

Compression x8 -
https://www.overclockers.co.uk/showproduct.php?prodid=WC-011-FO

Tubing -
http://www.overclockers.co.uk/showproduct.php?prodid=WC-031-XS

CPU Block -
https://www.overclockers.co.uk/showproduct.php?prodid=WC-012-EK&groupid=962&catid=1519&subcat=

I have got a fan controller, fans and rad!

Thanks for all the help so far, might actually get this finished

So what else do i need apart from water

Yoiu have the wrong tubing and compression combo:

YOUR BASKET
1 x OcUK Tech Lab - D5 Vario Pump & Alphacool Clear HF D5 Top Value Combo £84.98
1 x EK HD6970 Full Cover Waterblock - Nickel Plexi **EN Nickel Plating** £74.99
1 x EK Supreme HF CPU Waterblock - Nickel Plexi £55.79
1 x EK Multioption Reservoir X2 250 Advanced £38.99
2 x Mayhems Aurora - Nebula Blue Coolant 1L £14.99 (£29.98)
1 x Masterkleer Hose Pack PVC 15,9/11mm (7/16ID) Clear 3.3m £10.88
1 x OcUK Tube Cutter Aluminum 3-14mm £8.50
8 x EK PSC Compression Fitting 7/16 [16/11mm] - G1/4 - Nickel [3831109845011] £2.99 (£23.92)
Total : £340.01 (includes shipping : £10.00).

Change the fluid to the red and the cpu block to a copper (only if you really want to!)

GingeUK · 20 Dec 2011 at 17:39

So now i made some changes and I'm going with what cleeecooo said, and went with nickel, but I'm having problems finding compression fittings that are in stock, any ideas, I'm going to get this

http://www.watercoolinguk.co.uk/p/Masterkleer-Hose-Pack-PVC-15911mm-716ID-ClearUV-Blue-33m_12140.html

from there but i still need the compression fittings, will i need any clips as well?

Cleeecooo · 20 Dec 2011 at 18:07

You can't link competitors

IIRC, OcUK have an EK order coming in soon, just wait for that. (i'm sure rjk will confirm)

skyripper · 20 Dec 2011 at 18:13

If you have Compressions, you dont need clips. If you have barbs you do need clips. Unless you have 1/2" barbs and 7/16" hose, because the hose sticks tighter than a nuns undercrackers.