Watercooling spec please

[Alasdairhurst]

Hey, This is my first WC build, so i only have a vague idea whhat to pick;
From the look of it, i may be getting the bulk of my build next week as the 5% code would still be valid (unless you recommend waiting which could be a possibility as £170 discount could probably be got from T.W.O. offers over the next few months.

anyway, this is the build (there will be a 4770k and a gigabyte sniper 5 in there too)

YOUR BASKET
1 x Gainward GeForce GTX Titan 6144MB GDDR5 PCI-Express Graphics Card £799.99
1 x Crucial M500 960GB SATA 6Gb/s Solid State Hard Drive - (CT960M500SSD1) £487.99
1 x Dell UltraSharp U2713HM 27" Widescreen LED Monitor - Midnight Grey £439.99
1 x Corsair Obsidian 900D Super Tower Case £299.99
1 x Seasonic 860w '80 Plus Platinum' Modular Power Supply £169.99
1 x TeamGroup Xtreem LV 16GB (2x8GB) DDR3 PC3-19200C10 2400MHz Dual Channel Kit (TXD316G2400HC10QDC01) £119.99
2 x XSPC AX480 Quad Fan Radiator (Black) £109.98 (£219.96)
1 x XSPC Razor GTX Titan GPU Waterblock **GTX 780 COMPATIBLE** £94.99
1 x Aqua Computer Aquastream XT USB 12V Pump - Ultra Version £79.99
1 x XSPC RayStorm CPU WaterBlock (Intel) £51.98
1 x Bitspower Z-Multi 400mm Water Tank £42.98
4 x Corsair SP120 Quiet Series High Pressure Low Noise - Dual Pack (CO-9050006-WW) £25.99 (£103.96)
1 x EK Water Blocks EK-FC Titan Backplate - Black £24.95
1 x Corsair AF140 Quiet Series Low Noise High Airflow - Single Pack (CO-9050009-WW) £14.99
1 x ModMyMachine Shoggy Sandwich V2 for your Watercooling Pump £6.98
2 x XSPC HighFlex Hose 3/8" ID, 5/8" OD, 16/10mm, 2m, Clear £6.49 (£12.98)
1 x EK-EKoolants UV Green £5.99
10 x EK PSC Compression Fitting 13mm 3/8" - G1/4 - Black £3.89 (£38.90)
Total : £3,043.24 (includes shipping : £22.20).




I was wondering if you could fine tune the watercooling so that it is 100% compatible.

This is what i am hoping to achieve. The pump being in the basement:

 

[Alasdairhurst]

Anyone?

 

[Divx]

i dont think your fittings and tubing match sizes. you need to choose the same od and id.

If you are using barbs to attach your tubes to the other water-cooling components, then you only need to worry about ID, however if you are using compression fittings, you need to take into occount the OD of a tube.

for example, the fittings you have listed are:
Metric:
- ID 13mm; OD 19mm
Inch:
- ID 1/2"; OD 3/4"

so some suitable tubing would be:

2 x XSPC HighFlex Hose 1/2" ID, 3/4" OD, 19/12.7mm, 2m, Clear/UV


or maybe you want to choose some alternative fittings to match the tubing you listed, the choise is yours. just make sure they match.

you can also choose whether you want the uv reactive stuff or not and you might want to checkout the new primochill advanced range as it has its benefits (no clouding)


also the pump you have listed is currently out of stock and the ssd is pre-order.