• Notice regarding image hosts and attachments. See here.

Watercooling Spec

virdee2

virdee2

virdee2

Associate
Joined
10 Jan 2008
Posts
388
Location
Kent, UK
Hey everyone!

Could you please check this spec for me and ensure that i have correct fitting etc or perhaps advise on any changes you might advise on?

I have a dual rad i will be re-using so this setup will have 2 dual rads in the loop.

YOUR BASKET
1 x OcUK Tech Lab - XSPC D5 Vario Pump & EK-D5 X-RES 140 CSQ Value Combo £114.98
1 x EK Water Blocks EK-FC980 GTX - Nickel £89.99
1 x EK Water Blocks EK-Coolstream RAD XTC 280 £59.99
1 x XSPC RayStorm CPU WaterBlock (Intel) £49.99
2 x Monsoon 16/11mm (ID 7/16 OD 5/8) Free Center Compression Fitting Six Pack - Orange £24.95 (£49.90)
2 x Monsoon 16/10mm (OD 5/8) Rotary 90° - Orange £8.69 (£17.38)
4 x Monsoon 16/10mm (OD 5/8) Rotary 45° - Orange £8.69 (£34.76)
1 x Mayhems XT-1 150ml UV Blue Coolant £6.98
3 x XSPC 7/16" ID (16/11mm) High Flex Hose - Clear (1m Length) £2.99 (£8.97)
1 x XSPC PSU Bridging Connector (24 Pin) £1.99
Total : £444.52 (includes shipping : £8.00).



Any help is appreciated as i have only done one setup before and that was years ago.

Much love!
 
I myself am just doing a new loop, after lots of reviews and advice i changed the raystorm out for an EK evo cpu block due to better temps and a better mounting system and the same price.
 
few pointers, i'm no expert however; you will most likely need more than 150ml of fluid for this setup and some 140mm fans for that rad. Also check your fittings as you have a mixture of 16/10mm and 16/11mm
 
The fluid he has is a dye to colour distilled water so will be fine, however you are better off buying premix from what i read and the little it costs
 
sorry for the delay; I was confused by the size of the fittings but they don't have the same size ones so I thought they were just like that on purpose to provide a tight fit?
 
You must log in or register to reply here.
Back
Top Bottom