WC final spec check

[Chris Beard]

Pumps:
2x
EK DCP 2.2 400lph 12V Compact Pump


Blocks:
1x
XSPC Delta V3 CPU Waterblock Intel 1366, 775, AMD AM3, AM2+, AM2 :
1x
XSPC Chip Only Graphics Card Waterblock : X2O VGA


Rads:
2x
Hardware Labs Black Ice® SR Series 140mm Single Radiator : SR1 140



Fittings, tubing, res:
10x
1/4" Thread Compression Fitting for 3/8" ID- 1/2" OD Tubing : Black Nickel

3m
Tygon R3603 3/8" ID - 1/2" OD (10-13mm) Tubing : Clear

1x
XSPC 5.25" Single Drive Bay Reservoir with Multi Fascia : BR525AL




Single Loop: Res -> pump1 -> pump2 -> Rad1 -> GPU -> Rad 2 -> CPU -> Res

 

[Chris Beard]

I wanted to make sure that if one pump went down it'd not fry my GPU. I also wanted as much cooling as possible because I use 500rpm fans - as I can only fit two single rads (MATX case) I figured it would be good to make them 140mm rads.

Do you think a 140.1 rad would be OK for both GPU and CPU?

 

[Chris Beard]

Thanks for the replies everyone. I currently have an undervolted e8200 at 3.2Ghz and a stock hd5770. I might go xFire if my broken hd5770 survives being baked and makes a magical recovery. If water is good enough next upgrade would be i7 + nvidia GPU come new year.

My case is indeed very small - it's an Elite 340/341 or something similar modded with a dremel (pain in the ass on steal) to allow for 140mm fans front and back.