WC'ing HAF 932

Martini1991 · 3 Apr 2011 at 17:18

Hey.

Just really asking for idea's on WC'ing a HAF 932?

At the moment, I have a thermochill 120.2 and 120.1 RAD, two XSPC 750 lph res/pump (I was running two loops)

My two EK 6870 full waterblocks and an EK HF Supreme.

At the moment, I'm running a 3850 and my 2500k air cooled (shh)

I'm going to bottom mount the PSU, and get some extensions for the cables so I can route around the back of the case (They're currently not long enough)

I've getting some 3 pin splitters so I can run my 6 Xigamatek fans off 1 fan header (They're my rad fans)

I'm going to have a 120.1 with 2 Xigamatek fans rear mounted push/pull, and a 120.2 with 4 Xigamatek fans in push/pull on the roof.

I'm going to have the stock 200m front intake (On the HDD's) as is.

I'm using 4 Xcilense (Spelling) fans as intake on the side door with a 5th fan next to the PSU as intake.

So it's going to be pretty busy.

Any idea on where else I could mount a rad etc? or any other orientation?

At the moment, my case is in need of some TLC and I'm currently sanding it so I can repaint it, here's the rear part which has WC'ing grommets (Sanded, but rough, what colour should I use to spray paint it and the rest of the case? ;

bigjimmyauk · 4 Apr 2011 at 00:17

Why are you asking us what colour you should spray your case

Martini1991 · 4 Apr 2011 at 07:46

bigjimmyauk said:
Why are you asking us what colour you should spray your case

Not sure what colours go well at all.

bigjimmyauk · 4 Apr 2011 at 09:08

Martini1991 said:
Not sure what colours go well at all.

well considering your rig in sig i would go red and black, especially as you have a asus crosshair board.

also how many hdd's do you have as it might be worth removing the HDD cage behind the front fan. Doing this will give you lots of room for a pump and res if your not using a front bay pump and res combo

Greboth · 4 Apr 2011 at 09:27

Do you already have the rads? specifically the double as you can fit a triple in the top of the 932. Depending on your hdd's 5.25" drive bays then you could move hdds into drive bays and remove hdd cage or mount a 120.1 rad in spare drive bays.

Martini1991 · 4 Apr 2011 at 09:34

bigjimmyauk said:
well considering your rig in sig i would go red and black, especially as you have a asus crosshair board.

also how many hdd's do you have as it might be worth removing the HDD cage behind the front fan. Doing this will give you lots of room for a pump and res if your not using a front bay pump and res combo

I'm on a GD65 and 2500k now sorry.
I have 3 SSD's and 2 HDD's.

Greboth said:
Do you already have the rads? specifically the double as you can fit a triple in the top of the 932. Depending on your hdd's 5.25" drive bays then you could move hdds into drive bays and remove hdd cage or mount a 120.1 rad in spare drive bays.

Already have them.