Well I've Ordered It

krazycommando

krazycommando

krazycommando

Associate
Joined
17 Nov 2011
Posts
24
:)Hi All

Just ordered my first watercooling cooling system Ocuk V12 360 "2011 Compatible" hope it arrives friday so can have a go at the weekend. Will be on a X58 for now in a 800d. In a couple of weeks going to look at X79 and learn a bit about overclocking with a bit of luck and maybe buy one. Any help and tips most welcome
 
Hi

Thanks for reply but i think i asked the question wrongly am i right in saying the pump plugs into the psu so this is on all the time and would the rear fan header? plug into cpu header and the rad fans header cables plug into sys fan header so they contol the fans. hope this sounds better
 
Hi S7cn

thanks for quick reply does the pump have 3 pin header then as well as power cable cant look yet as still waiting for them to send it and something like the lamptron for a contoller
 
Thanks for that S7cn sorry for the questions it is the laing d5 will wait till i get it to see how to vary the rpm. Looking at the fan controllers i take it the lamptron is good because of the watts per channel does this mean you could put the 3 fans from the rad on one channel so it keeps them the same speed or would they be better with o1 on each one thanks again for your help
 
Thanks for that s7cn i take it the fans are on a splitter if you are connecting 4 fans to 1 channel. So when i eventually get my order i will look and see what i need as i have a 800d and i dont know if i am going to put it on the X58 or wait and see what i buy a week on saturday ( sorry cannot say were)
 
Should have the following arriving tomorrow

1X XSPC RS360 120mm Radiator - Black
1X 12V Alphacool Laing D5 Vario Pump 655
1X Alphacool HF D5 TOP - Black Acetal G1/4
1X EK Supreme HF CPU Waterblock - Copper Plexi
1X XSPC Single Bay Reservoir
3X Sharkoon Silent Eagle 2000 120mm - 3/4 Pin fans
2X Mayhems X1 UV Blue Premixed Watercooling Fluid
2X XSPC 7/16" ID [16/11mm] Clear
8X OcUK 1/2" Barbed Fitting G1/4 - FatBoy Style - Black Nickel Finish

Also going to get couple of litre deionised water to flush out once ive set it up if that is correct any further suggestions most welcome and thanks for the help
 
Cheers for that s7cn could i run ordinary tap water through rad first or no need for that
will try and get some pics if i can but must warn you cable work not to neat didnt know wether to wait till next weekend when might get X79 3939 + asus deluxe or extreme rampage
 
Ok will hopefully have time to get it set up over weekend and give it a couple of runs through with distilled first. Have got spare psu and Antec psu tester so can run with that and leave computer psu unplugged oh and must buy roll of paper towelling lol (just in case)
 
Its Arrived
wcpart6s.th.jpg
[/URL][/IMG]
 
You must log in or register to reply here.
Back
Top Bottom