• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

What have I done to my CPU?

Associate
Joined
26 Oct 2004
Posts
1,792
Location
Near Brighton
** Passing Don, can you please delete my other thread on thus subject as i wanted to make a new more indepth and detailed one, thanks very much :)**

Hey all

first: My specs:

DFI Lanparty 915p-T12
LG775 3.2 Intel P4 CPU
Raptor 36gb HDD (main drive)
Maxtor diamond 200gb SATA (storage)
X800 standard
Audigy 2 zs
1gb Geil Value RAM

After enduring abour 4 months it must be now of my computer being to hot, i decided to see what the problem was.
The system has been running fine at around 25 degrees, its just the CPU which has been running at a cool 65 degrees :cool: . its a LG775 3.2 pentium 4 with a stock cooler.
The whole system would shut down after using apps such as limewire and gaming was a no go.
First of all i took the side of my case off to investigate. I then proceeded to remove the heatsink where i was amazed to see how much arctic silver there was on both the heatsink and CPU.
Pictures for you:

http://img480.imageshack.us/my.php?image=10041754gy.jpg bottom of heatsink

http://img466.imageshack.us/my.php?image=10041784ta.jpg CPU

Once i had had a look at them both i decided to spread the arctic more evenly across the CPU like it is in the picture. and didnt touch the heatsink.
Once i had done this and put the heatsink back on, i booted up the computer as normal to find that it didnt want to go past the DFI Lanparty screen so i was not able to get into BIOS.
I looked on my motherboard to see that only 3 of the 4 lights were showing so i knew there was something wrong.
I looked in my motherboard manual and it says that the 3 lights that were on meant:

''Testing all memory (cleared all extended memory to 0)".

I looked this up on google and have found nothing.
Im really worried i have done something to the CPU when i took it out from its place on the motherboard or its somthing to do with the arctic silver. I did touch the pins a couple of times with my bare hands but surely that wouldnt have done anything?
thanks for any help guys! much appreciated :)

Chris

Chris
 
Cody said:
Try removing the processor and checking that you didn't get any paste underneath, especially around the edges. Also make sure that you have all 4 corners of the stock heatsink clipped into the board.

Sorry if this sounds like stating the obvious but it hjas worked for me in the past.

thanks mate,ill give it a go in a mnute :) have u had the same problem as me then? where it wont boot up?
 
Back
Top Bottom