I bought a 2gig twinx kit from OCUK a couple of months back. Its the Corsair 2GB DDR XMS3200C2PT TwinX (2x1GB) CAS2 (MY-079-CS) as advertised on the website. It claims to have timings of 2-3-3-6. When I installed the ram and let the bios choose its auto settings the timings it detected were 3-3-3-8. I thought must be a glitch and set it to the advertised 2-3-3-6. Howvere, I've been having stability issues with it but I thought may be down to the raid 0 setup I was trying for the first time cos sometimes I got file corruption and that. Anyway I thought I'd run cpu-z and according to that the part number is CMX1024-3200C2, which is what it should be if indeed it is the proper 2-3-3-6 stuff, but the timings table tells me it is cas 3.0 3-3-8, which just happens to match the "Corsair 2GB DDR XMS3200PT TwinX (2x1GB) CAS3 (MY-039-CS)" ram on the same web page. WHat's going on here then? Any ideas?
What memory do I have here?
- Thread starter Bubo
- Start date
They are currently in an A8V @ 2.8V running at approx 202Mhz. My main concern was are the chips as advertised i.e. 2-3-3-6 or was I the victim of bogus chips. From what you say its normal for them to auto to 3-3-3-8, even if that sounds daft. I've just bought a DFI lan party ultra-d and a 8800gtx so I wanted to make sure the ram was ok before I start building the new rig. I know I've run memtest on it and it passes ok so must be something else causing the instability. I'm going to give raid a miss when I rebuild, seems its more trouble than its worth really.
I wonder how many people bought these and accepted the defaults and are running at 3-3-3-8? I don't see anywhere on corairs site or OCUK where it goes out of its way to say you have to manually overide your bios. Not being a hardcore geek I'm not aware if it is taken as granted you have to do this, didn't have to with my old 3200LLPT sticks.
Hmmm, further digging Corsairs compatabilty site has reavealed these modules are only guaranteed to run at 2T on my mb. I am running them at 1T. Wonder if thats the problem, even though they pass memtest as I said.
I wonder how many people bought these and accepted the defaults and are running at 3-3-3-8? I don't see anywhere on corairs site or OCUK where it goes out of its way to say you have to manually overide your bios. Not being a hardcore geek I'm not aware if it is taken as granted you have to do this, didn't have to with my old 3200LLPT sticks.
Hmmm, further digging Corsairs compatabilty site has reavealed these modules are only guaranteed to run at 2T on my mb. I am running them at 1T. Wonder if thats the problem, even though they pass memtest as I said.
Last edited: