What settings for 939 overclocking?

Xplo · 24 May 2006 at 18:43

Ok ive never overclocked an 939 system before so bear with me.

basically ive got a hypertransport setting which i think i need to change, the options are 200mhz,400mhz,600mhz,800mhz,1000mhz. Which one should i choose.

Ive been told by the person i bought the chip off it can do this:

FSB 270
HT x3
Volts 1.6v
Memory @ 166 divider so was running at 225mhz @ 2.7v

Im assuming HT is hypertransport but it says x3? so what mhz do i need to set the ht to?

Xplo · 24 May 2006 at 18:52

huh??

So you saying put my fsb at 270, multiplier at 3 and ht @ 1000mhz?

Xplo · 24 May 2006 at 19:13

Hmm ok ta

One thing is i done this

fsb270
multi 10 (its a venice 3200 so this is stock multi)
hypertransport @ 200mhz
voltage @ 1.6

Well it didnt quite like those settings, blue screen after two loads of the xp loading bar.

Xplo · 24 May 2006 at 19:38

No ive got 512mb hyperx pc3500 so it should be fine. Got into windows all hunky dorey at

250fsb
ht3x
1.6v

so i then tried

270
3x
1.6

no go

270
3x
1.625

got into windows and waiting to stress, mite need 1.65 at that speed though, would 1.65 be ok on air if temps are ok (below 50 load)?

Ironicly waiting for things to cool down before i stress, was running 57idle :O at 1.625, stock cooling, the fan was at 7v tho. Gonna see what it wnats to idle at before i continue, cheers for the help.