What temps should i be seeing on load?

Trox · 20 Dec 2006 at 16:26

Watercooled Swiftech kit, dual rad, with the Strom cpu block...

What temps should i be seeing while the E6600 is clocked at 3.6ghz when running Orthos?
At the moment it ranges from 57 to 65 on load, 1.45vcore, room temp of around 23degC

Thinking i might need to reseat the block of something, but saying that its quite an overclock.

Cheers
Trox

mattup · 20 Dec 2006 at 16:49

My rig is similar to yours. Those temps are average for your clock and Vcore.

Out of interest feel the hot air being exhusted from the 8800. If you have a rad box set up. The warm air from the card goes through the rad!

Looking forward to the EK blocks for the 8800 series cards.

Matt

Trox · 20 Dec 2006 at 16:51

nice thanks for the info m8

Wasnt too sure what to expect, good to know the temps are ok. My rad is mounted externally on the rear so its not too bad

Yea really want a block for the 8800! or the swiftech bracket hehe

malccy · 20 Dec 2006 at 17:15

My temps with my E6600 at 3.6ghz with a Thermochill 120.2 rad and an Aquaextreme MP-05 on load are lot lower than those - highest I think was 48.

g00dsh0t · 23 Dec 2006 at 18:38

hi Trox, my temps with dual rad(internal) 2 push/2 pull
cpu= [email protected] = 33c
gpu= 8800GTX@600/2GHz = 41c
how many fans on your rad, ive tried loads from ambers to zalmans (but im a bit of a fan freak) and for me the scythe 1600rpms@1000rpms are silent and keep the temps as above
merry xmas by the way