What to tune

chroniclard · 13 Apr 2021 at 09:24

So, I have overclocked my 3200 8Pack Teamgroup memory to the following, which I think is ok. This runs at the stock 1.35v, which seems quite good to me.

I briefly tried 3800 but it would not boot, even with bumping voltage a bit, so think will focus on tuning this to the max.

Any tips on what I could potentially tweak further?

chroniclard · 13 Apr 2021 at 12:33

Never mind, found a decent guide and managed to tweak the secondary timings down a fair bit. Happy with results until I have time to try and tweak the primaries down a little.

Fractured Life · 14 Apr 2021 at 20:00

Where did you end up with latest tune?

I've different memory but same board (and half your chip lol) so always interesting to see where people end up! From reading guides, TFAW and RRD's will go lower down along with WTR's and TWR; TRTP TRDWR TWRRD can go lower; your SCL's might go lower than 4; you can probably get rid of GDM if you are spending the time to tune.

chroniclard · 15 Apr 2021 at 10:28

Fractured Life said:
Where did you end up with latest tune?

I've different memory but same board (and half your chip lol) so always interesting to see where people end up! From reading guides, TFAW and RRD's will go lower down along with WTR's and TWR; TRTP TRDWR TWRRD can go lower; your SCL's might go lower than 4; you can probably get rid of GDM if you are spending the time to tune.

Not hugely different but slightly better. Think there is perhaps a little more in the tank but not sure I can be bothered spending hours more on it for minimal gains, think thats ok for a Ryzen 3000 series and 3200 memory.

(Want to upgrade to 32gb at some point soonish, if stock ever improves)

Also have not changed voltage from the default 1.35 so thats good!

Used this guide to tweak a few of the timings, pretty good.

MemTestHelper/DDR4 OC Guide.md at master · integralfx/MemTestHelper (github.com)