Memory Controller
Type Dual Channel (128-bit)
Active Mode Dual Channel (128-bit)
Memory Timings
CAS Latency (CL) 5T
RAS To CAS Delay (tRCD) 5T
RAS Precharge (tRP) 5T
RAS Active Time (tRAS) 18T
Row Refresh Cycle Time (tRFC) 42T
Command Rate (CR) 2T
RAS To RAS Delay (tRRD) 3T
Write Recovery Time (tWR) 14T
Read To Read Delay (tRTR) Same Rank: 4T, Different Rank: 6T (THIS)
Read To Write Delay (tRTW) 8T
Write To Read Delay (tWTR) Same Rank: 11T, Different Rank: 5T (THIS)
Write To Write Delay (tWTW) Same Rank: 4T, Different Rank: 6T (THIS)
Read To Precharge Delay (tRTP) 5T
Write To Precharge Delay (tWTP) 14T
Refresh Period (tREF) 3120T (THIS)
DRAM Read ODT 3T
DRAM Write ODT 6T
MCH Read ODT 8T
Performance Level 3
Read Delay Phase Adjust Neutral
DIMM1 Clock Fine Delay 2T
DIMM2 Clock Fine Delay 7T (why different?)
DIMM3 Clock Fine Delay 2T
DIMM4 Clock Fine Delay 8T(same again)
Memory Slots
DRAM Slot #1 1024 MB (DDR2-800 DDR2 SDRAM)
DRAM Slot #2 1024 MB (DDR2-800 DDR2 SDRAM)
DRAM Slot #3 1024 MB (DDR2-800 DDR2 SDRAM)
DRAM Slot #4 1024 MB (DDR2-800 DDR2 SDRAM)
This is what everest tells me when Im running all 4 sticks of GEIL ULL ram which im having no end of problems with. All of them memtest fine but corrupt windows files when used all together.
Type Dual Channel (128-bit)
Active Mode Dual Channel (128-bit)
Memory Timings
CAS Latency (CL) 5T
RAS To CAS Delay (tRCD) 5T
RAS Precharge (tRP) 5T
RAS Active Time (tRAS) 18T
Row Refresh Cycle Time (tRFC) 42T
Command Rate (CR) 2T
RAS To RAS Delay (tRRD) 3T
Write Recovery Time (tWR) 14T
Read To Read Delay (tRTR) Same Rank: 4T, Different Rank: 6T (THIS)
Read To Write Delay (tRTW) 8T
Write To Read Delay (tWTR) Same Rank: 11T, Different Rank: 5T (THIS)
Write To Write Delay (tWTW) Same Rank: 4T, Different Rank: 6T (THIS)
Read To Precharge Delay (tRTP) 5T
Write To Precharge Delay (tWTP) 14T
Refresh Period (tREF) 3120T (THIS)
DRAM Read ODT 3T
DRAM Write ODT 6T
MCH Read ODT 8T
Performance Level 3
Read Delay Phase Adjust Neutral
DIMM1 Clock Fine Delay 2T
DIMM2 Clock Fine Delay 7T (why different?)
DIMM3 Clock Fine Delay 2T
DIMM4 Clock Fine Delay 8T(same again)
Memory Slots
DRAM Slot #1 1024 MB (DDR2-800 DDR2 SDRAM)
DRAM Slot #2 1024 MB (DDR2-800 DDR2 SDRAM)
DRAM Slot #3 1024 MB (DDR2-800 DDR2 SDRAM)
DRAM Slot #4 1024 MB (DDR2-800 DDR2 SDRAM)
This is what everest tells me when Im running all 4 sticks of GEIL ULL ram which im having no end of problems with. All of them memtest fine but corrupt windows files when used all together.
