Which radiator would you choose?

low rpm I would go for a single RX480 with gentle typhoons 1450rpm in push or perhaps push and pull.

Or alternatively, a RX360 and a RX240 should be more than enough to meet your requirements.

What sort of hardware are you cooling? e.g i7 bloomfield, gtx 580 etc.
 
How much modding are you prepared to do as you'll stuggle to get much more than a 480 and a 140 in there (this will require some heavy modding) A 360 will bolt in and any of the low fpi rads would be good (SR1 or EX) if you're going to keep the 200mm top fans.

Personally I'm thinking I might make a replacement roof for the case that'll house a 480 well, then removing the HDD cage and fitting a phobya 200mm rad to the front fan.
 
You could mount the rad 480 rad externally which would require no/minimal mod work.
 
Last edited:
there are fan bracket mounting kits which screw into the rear exhaust of cases which give you a result like this:

BQnPt.jpg


You can then route the tubing through the HAF-X's tube grommets :)
 
Alterative bracket would be the EK-UNI Rad 140 or 120

Koolance bracket: The Koolance BKT-HX001 is an adjustable heat exchanger mounting bracket with quick-release feature. Heavy steel construction supports heavier radiators (such as 4-fan sizes) with minimal movement. BKT-HX001 is designed for 120mm fan radiator spacing, with holes to mount to a 120mm fan grill on the computer chassis side
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom