Which SCSI card?

bloodiedathame

bloodiedathame

bloodiedathame

Soldato
Joined
11 May 2007
Posts
9,088
Location
Surrey
I have an HP Z800 at work and an EonStor SCSI-320 8-bay RAID setup that I want to hook it up to.

I'm guessing a PCIe SCSI card is what I need, but are the ones I've found all the same, or do I need something specific for the RAID drive?

I don't deal with PC hardware much any more, and I have never ventured into the world of SCSI.

Thanks!
 
Thanks for that, your link led me to look for the document for the model we have which is this: http://www.nexstor.co.uk/prod_pdfs/SCSI-320%20to%20SATA-II%208-bay%20Cube%20RAID%20-%20A08U-C2411%20(MassCube-I).pdf

It lists the card I need as a SCSI to SATA RAID controller, rather than SCSI to SCSI RAID. Is this the same thing?

Also is there any difference between x1 and x4 cards, I'm not sure the PC has an x1 slot but it does have an x4, so would an x1 card work in an x4 slot? PCI slots are a pain, PCI, PCIX, PCIe, Gen 1, Gen 2. I mean seriously what the hell kind of branding is that?! Our Z 800 has PCI Express Gen 1 and Gen 2 slots, whatever that means... So I can use PCIX or PCIe?

I'm guessing by your answer that any card with the correct slot and offering some sort of RAID control will be fine really?
 
Last edited:
Yes I think so, the physical cable is SCSI-SCSI, but the drives inside are in SATA RAID, in which case the LSI and Adaptec both should work.

So a PCIE 4x card is the way forward.

Have sent them off an email, will let you know if they reply.

Thanks again for your help!
 
Update. Finally after a power supply fail, drive fail and loss of a weeks work I have managed to get round to hooking the RAID up to the Windows 7 workstation. I configured the drives, volumes, lun and RAID5 via the designated Eonstor software Raidwatch, and I can see a 5.5TB drive in Disc Management.

However when I come to format the drives (NTFS) I can't seem to do it through the Windows Disc Management GUI or through DOS diskpart. I did manage to mount the drive, so it shows up as RAW and GPT. However if I try and do anything with the drive, DM becomes unresponsive as does diskpart (even changing the path (F:/ -> H:/))

I noticed an IO error in one message after a failed format which suggests maybe a problem with the SCSI card. The second attempt I had the error message that pointed to a Remote Procedure Call problem... can't remember the error itself but Google was unhelpful.

Any ideas?
 
You must log in or register to reply here.
Back
Top Bottom