Will a SFF PC meet my needs?

GSXRMovistar

GSXRMovistar

GSXRMovistar

Soldato
Joined
6 Nov 2002
Posts
9,878
Location
London UK
Okay my main PC is getting on a little and showing signs of struggling, not to mention issues with cooling, requiring the side off and fans up high otherwise it crashes (I’ve got a whole load of drives and cards in it).

Now I’ve no longer got the time to play PC games so not looking for a gaming beast but something fairly powerful that can sit on my desk out the way.

If I decided to go down the custom build route (was tempted to go off the shelf as I’m sick building PCs and dealing with the problems) would a SFF PC be able to meet the below requirements and if so any spec recommendations?

Primary uses, Internet, Office work, media playback, Photo and Video Editing (inc HD content) Adobe Photoshop/Premier
4Gb Ram
1Tb local storage (ideally 2* 500Tb)
Dual DVI
Freeview playback
Not going to drain the national grid
Not going to sound like a 747 taking off

Lastly I’m not interested in overclocking it or messing about with all the various timing and config settings, just want to be able to plug the bits together and get the O/S and software on it.

Thanks for any advice
 
Thanks for the info guys, I think my system is currently 939 based, an Athlon 64 3000. The rest of the current spec

ABIT AV8-3rd Eye Motherboard
2* 512Mb matched memory
ATI Radeon 9800 Pro
Audigy 2 soundcard
Nebula DigiTV PCI
Tagan 480 PSW
5 various hard drives (IDE/SATA) rangging from 180Gb-500Gb
LG DVD drive
Loads of fans connected to a controller
Some generic dodgy old case

Would another 939 based system be that future proof, i thought by now that would be old hat?

I noticed the Sugo SG03 in a few other threads, they look pretty smart, is there any advantage of having a MiniATX based system over say a Shuttle (I've also got one of those as a media box, Barton 2500 based)?
 
damian666 said:
yep the only variations are the same as full atx 20/24 pin variants not sure if theres any that use the 8 pin p4 connector though?
Click to expand...
Okay thats interesting, would be handy if I could use my old PSU. So if I went for say a Sugo SG03 I'd need the following new bits

Case (SG03)
Motherboard
CPU
Cooler (NT06)
Memory (Maybe just 2Gb for starters and also use my existing 2*512Mb)
GFX Card (Existing card is AGP)
500Gb HD

Then I could re-use the following

PSU
DVD
TV Card
500Gb HD
 
Tute said:
Well you could certainly re-use the CPU as I said, it would be more than quick enough for what you need it for.

You can also re-use the RAM (939 is DDR) and maybe even the graphics card, if you decided to go for a Socket 939 mATX AGP board.

If you go with integrated graphics then you won't need a new one though. :)
Click to expand...
If I do upgrade then I'll probaly avoid 939, the reason I'm considering this is my current setup is a little too slow for my liking in Photoshop so can't see a new box being any/that much quicker if its the same CPU.

damian666 said:
If your going for the sugo might be worth buying an extra 120mm fan as they only come with one i would suggest this if you hard drive is I.D.E as well.
Click to expand...
It will be SATA drives but I've got loads of 120mm fans so dropping one in won't harm.

squiffy said:
I would seriously consider a MATX
Click to expand...
Yeah seems like the best option as I can re-use so much of my current setup.
 
Okay I've put the following spec together, any comments on whether there is any problems with it:-

Silverstone Sugo SG03 - £83.43
Gigabyte GA G33M-S2 - £63.44
GeIL 2GB (2x1GB) PC6400C4 800MHz Ultra Low Latency DDR2 Dual Channel Kit - £70.49 *2
Intel Core 2 Quad Pro Q6600 "LGA775 Kentsfield" 2.40GHz (1066FSB) - Retail - £172.70
Silverstone SST-NT06 Lite NT06 w/o 120mm fan. w/o fan controller AM2 RoHS - £25.85
Seagate Barracuda 7200.10 500GB ST3500630AS SATA-II 16MB Cache - OEM - £63.32

Lastly I need a GFX card to go with it, requirements are dual DVI, fits in the above setup, can play the odd game (don't need extreme cutting edge), not too noisey and ideally around the £100 mark or lower.

Only other consideration is PSU, currently got a decent Tagen 480w supply that I'm hoping to reuse but as it's not modular I'm not sure if I'll have issues fitting all the cables in. If it doesn't fit its not a major problem as I can use it elsewhere but if I do need to replace it any suggestions what with?

Thanks again for the assistance. :)
 
damian666 said:
Spec lo9oks good you need to factor in a aftermarket cooler as well the nt06 is highly recommended as a good partner for the sg03 and a psu with 120mm fan
Click to expand...
Yep already had the nt06 on my list above, decided on the fanless version as I think it would sit under a PSU in the case (or is that just the Sugo G01?), and the PSUs fan could be used to extract heat.

Kezmo said:
Id deffo get a modular psu for better airflow as space is tight, itll be a lot easier to build and will be a hell of a lot tidier also.

The Enermax liberty 500 or the corsair 520 get my vote :)
Click to expand...
Do you think 500 watts will be required for this system them, rather than a 400 watt PSU?

Kezmo said:
And This Graphics card
Click to expand...
Cool, I noticed this card earlier as it seems to tick all the boxes. Any reason for recommending an ATI over Nvidia seeing as you currently have an Nvidia card listed in your sig?

As usual thanks for the help. :)
 
Tute said:
I'd recommend the Corsair HX520 or HX620 PSUs as they're just amazing power supplies really. :)
Click to expand...
Good good, do the Corsairs have a fan at the bottom of them? I can't seem to find any pics online.

Tute said:
You could also consider waiting for a "G0" stepping Q6600? They run cooler than the ones currently available.
Click to expand...
I'm not looking to overclock so if the non G0 runs without issue I'm not too fussed about the cooler temps.

Tute said:
Graphics card, well, there's the X1950 Pro, or if you don't feel you need so much oomph, the X1650XT at £45. It still carries dual DVI, but it's half the price of the X1950 Pro, whilst still being quite quick.
Click to expand...
Argh decisions, decisions. Suppose it depends on the level of differences between them but I guess if I'm spending circa £600 on this rig I may as well not cut any corners.
 
Due to stock availability and a few price changes I ended up ordering the following:-

Case - Silverstone Sugo SG03
Motherboard - Gigabyte GA G33M-S2
Memory - 4GB (4x1GB) CorsairTwinX XMS2, DDR2 PC2-6400 (800), 240 Pins, Non-ECC Unbuffered, CAS 5-5-5-12
CPU - Intel Core 2 Quad Pro Q6600 "LGA775 Kentsfield" 2.40GHz (1066FSB) - Retail
Cooler - Silverstone SST-NT06 Lite NT06 w/o 120mm fan. w/o fan controller AM2 RoHS
Harddrive - 500 Gb Western Digital WD5000AAKS Caviar SE16, SATA300, 7200 rpm, 16MB Cache, 8.9 ms
GFX - Sapphire ATI Radeon X1950 Pro 512MB GDDR3 HDTV/Dual DVI
PSU - Zalman ZM500-HP Heatpipe Cooled 500W Modular PSU
 
Thanks for all the advice people, all turned up last week and I put it together. What surprised me was this was the first time ever that after assembling everything and powering it up it worked first time!

Normally something always needs to be re-connected/seated or some sort of issue with bios settings.

Vista x64 Ultimate installed and everything seems to be flying alone, al in all very impressed with it.
 
mxl said:
What is it like on the noise front now that you have had it for a while? Which is the loudest component and could you reasonably have made it quieter?

Mike
Click to expand...
Its fairly quiet, not silent but in no ways loud or disturbing. The loudest noise is the DVD drive when it has a disc in it but I tend to leave it empty where possible.

Under standard load, ie browsing, media playback its fine but the noise does increase when say a game is running but I would normally have the speakers or headphone on there so I don't hear a thing.
 
You must log in or register to reply here.
Back
Top Bottom