Looking to buy something along the lines of an 8800GT or ATi 3870 but not sure about my PSU. I'll also be upgrading to an X2 6000 CPU from my current 4200. I really don't have much else in the system - 1 HD, 1 DVD-ROM, X-FI, couple of 80mm fans.
Anyway, the PSU is an X-Clio 460W Stable Power. I'll paste the specs in below...
Type ATX V2.2
Maximum Power 460W
Fans 1
PFC Active
Main Connector 20+4Pin
+12V Rails 2
PCI-E Connectors 1 x 6Pin
NVIDIA SLI Support No
Modular Cabling Support No
Power Good Signal 100-500ms
Hold-up Time 17ms min.
Efficiency 80% under full Load at nominal input voltage
Over Voltage Protection +3.3V, +5V and +12V.
Overload Protection +3.3V, +5V.
Input Voltage 100 - 240 V
Input Frequency Range 50/60 Hz
Input Current 8/ 4A
Output +3.3V@25A;+5V@22A;+12V1@18A;+12V2@16A;[email protected]; [email protected]
MTBF 100K hrs minimum, 25°C ambient
Thanks!
Anyway, the PSU is an X-Clio 460W Stable Power. I'll paste the specs in below...
Type ATX V2.2
Maximum Power 460W
Fans 1
PFC Active
Main Connector 20+4Pin
+12V Rails 2
PCI-E Connectors 1 x 6Pin
NVIDIA SLI Support No
Modular Cabling Support No
Power Good Signal 100-500ms
Hold-up Time 17ms min.
Efficiency 80% under full Load at nominal input voltage
Over Voltage Protection +3.3V, +5V and +12V.
Overload Protection +3.3V, +5V.
Input Voltage 100 - 240 V
Input Frequency Range 50/60 Hz
Input Current 8/ 4A
Output +3.3V@25A;+5V@22A;+12V1@18A;+12V2@16A;[email protected]; [email protected]
MTBF 100K hrs minimum, 25°C ambient
Thanks!
