Will the Superflower Leadex Gold fit in my 600T?

chivs688 · 1 Mar 2015 at 12:46

Have the Corsair 600T case, and just purchased the Superflower Leadex Gold 750W PSU. But I've just seen a couple people saying that it's a larger than normal PSU.

Just wanted to check if it will fit in my case?

Thanks.

stulid · 1 Mar 2015 at 12:49

If you go to the Corsair website and look at the specs for your case it will tell you the maximum PSU length it supports.

If you then go to Superflower's website and look at the PSU model it will give you the dimensions.

Then you can see if it will or not.

You also do not need two threads asking the same question.

lee32uk · 1 Mar 2015 at 13:02

The 600T max psu length is 200mm. The Superflower is 200mm long so it will fit.

RJC · 1 Mar 2015 at 13:02

Yes it will, max length of of case PSU enclosure 200mm, psu is 200mm.

http://www.corsair.com/it-it/graphite-series-600t

http://www.super-flower.com.tw/products_detail.php?class=2&sn=17&ID=101&lang=en

chivs688 · 1 Mar 2015 at 13:04

Okay perfect thanks!

pastymuncher · 1 Mar 2015 at 13:07

Aaaarrrrrrggggghhhhh Stulid. I just typed a answer in his other thread with dimensions and links to pics, clicked on submit only to get a admin message. I have to do it all again now.

It will fit easily. It's only the length that's different, the width and height are the same as a standard size psu. The Superflower is 200mm long while most 750w psu's are in the 160-170mm range. There are a couple of pics in this review of your case showing a Corsair AX1200 installed which is the same size as the Superflower.

stulid · 1 Mar 2015 at 13:51

I didnt want to give the answer directly as its easy to find the answer.

Teach a man to fish and all that.

chivs688 · 2 Mar 2015 at 12:56

Yeah I did look at the specs before I posted the thread, but could only find a reference to the possible length of the cases PSU bit, nothing about width or height. Just wasn't sure if it was just the length that was big for the PSU or the width and height also, so just wanted to double check.

Thanks all.

lee32uk · 2 Mar 2015 at 13:29

chivs688 said:
Yeah I did look at the specs before I posted the thread, but could only find a reference to the possible length of the cases PSU bit, nothing about width or height. Just wasn't sure if it was just the length that was big for the PSU or the width and height also, so just wanted to double check.

Thanks all.

The Width and Height is 'Standard' across ATX power supplies (150mm x 86mm). You only need to check the length of the unit to determine whether it will fit or not.

Blackjack Davy · 2 Mar 2015 at 17:04

Mine appears to be a slightly odd length (210mm) but it fitted in I had to remove the bracket thingy thats supposed to support the PSU backend somehow, its only fastened by the 4 case mounting screws. It sits on the bottom of my 600T so its supported ok, good thing too as it must weigh 4 or 5 kilograms. The case doesn't get moved much if ever so I figure I'm ok.