Will this watercooling loop work? (shopping list)

[surge]

T

But then if i do that then i wont be able to have a res/pump in one because id have no drive bays bah

http://forums.overclockers.co.uk/showpost.php?p=12041401&postcount=7

Here's a link to to a (bad) picture of the pump/re combo I suggested in my set-up

http://forums.overclockers.co.uk/showpost.php?p=11705494&postcount=12

 

[Admiral Huddy]

I would google to see if the results show anyone who had modified the case.. see what other have done if at all..Unfortunately, the Kandalf wasn't ideal for internal WC. However, an experience modder would have better luck, although I found nothing.

Next port of call is to try and measure out where your bits will go. Forward planning saves heaps of time later.

 

[IceShock]

Here's a link to to a (bad) picture of the pump/re combo I suggested in my set-up

http://forums.overclockers.co.uk/showpost.php?p=11705494&postcount=12

not bad does the trick!

I would google to see if the results show anyone who had modified the case.. see what other have done if at all..Unfortunately, the Kandalf wasn't ideal for internal WC. However, an experience modder would have better luck, although I found nothing.

Next port of call is to try and measure out where your bits will go. Forward planning saves heaps of time later.

Yeah, what i was planning to do was just velcrow (sorry for spelling if i spelt it wrong), velcrow the 120.3 rad to the side and bottom of the case in the drive bay area stood up so it can be removed and put back which is a really effective design seen it done a few times, then just having a small res out back neer where the pre drilled tube holes are on the back of the case neer the psu, then having a pump on the floor of the case etc.