Windows 10 - get corrupted - problem with hardware?

[and23]

So i was using my Windows 10 Pro fine. Then i decide ( no reason ) to test memtest86 from bootable USB. Then after 5 hours ( without errors memtest ) i stop test. Then after this i boot windows and windows just get broken. ( AND THEN : Everytime i properly restart system windows after next boot windows showing Automatiic repair and then again is restart. And event viewer showing that closing system was not properly.But windows was closed properly.
Second issue.
Some of the applications randomly wont run. I mean i am clicking to open and nothing happens )



Is this only coincedence or not if it happens after memtest session?

But i checked:

Memtest86 - not showing errors
HDTUNE - no errors, Smart 100% ok health.
Cpu 4790k - good temps


My disk is Samsung Evo SSD 250 GB, ram Kingston Hyperx 2x8gb 1600mhz


I made topic because some peoples told me that corrupt data , can be caused by faulty memory(( What is yours opinions? But like i said i test memtest86 and hdtune and no errors.

 

[and23]

I used memtest86 from bootable USB. All was fine before memtest86 lol.
I just run test from booted usb, then after 5 hours without errors i decided to stop test, then of course exit test and booted windows. And then windows broken .

 

[and23]

I made topic because some peoples told me that corrupt data , can be caused by faulty memory(( What is yours opinions? But like i said i test memtest86 and hdtune and no errors.

 

[and23]

This is strange as it happened to my pc. When I upgraded my RAM I ran memtest without error, after reboot Automatiic repair started. I then ran memtest again a few days later after changing to XMP setting and after reboot Automatiic repair started?

So you had the same situation ?After session of memtest without errors,after reboot windows shows automatic repair. So where is the problem? It is something with our memory or its a windows issue?

 

[and23]

Had a similar issue with a couple of kits of Crucial Ballistix LED ram.

Ran fine for months then all of a sudden started getting reboot loops with anything more than one stick installed. All sticks tested fine individually. In the end I sold both kits and went with Team Group as a replacement. No problems since running 4x8GB

Check your motherboard manual QVL for approved memory. I'd have thought the Kingston kit you have will be there but if not try another kit.

No no i dont have no reason reboots with my rams. You read wrong

I was properly restarting system ( by windows click from START )but after next boot windows showing Automatic repair and diagnosing pc. Then after next second boot windows just booted fine. But event viewer saying that system was not closed properly. Why this happened?



ps yes my mobo is on ram support list:

http://www.kingston.com/us/memory/s...r_ASUS/ASmobile_SABERTOOTH_Z97_MARK_2/USB_3.1

 

[and23]

Think memtest must save something to disk and windows detects the change and runs a repair. I have not had any other problems and it only happen after running memtest.

But now is fine? I formatted disk and its fine ALso did you check event viewer after this? I check and event viewer saying that system was not closed properly but it was properly closed.

 

[and23]

Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem occurs only when starting system again after shutdown. So its a software or hardware?

 

[and23]

Somebody said to me this:"had similar issues, replaced RAM and I have been error free since." So thats why i am confused now. Also memtest86 dont giving errors. What you think guys?

 

[and23]

Think memtest must save something to disk and windows detects the change and runs a repair. I have not had any other problems and it only happen after running memtest.

So you have Windows 10? It can be related to OS/bios. Because after memtest you changing boot from usb to sdd right?