Windows 10 keeps corrupting profiles

Associate
Joined
28 Oct 2005
Posts
511
Anyone else come across across windows 10 keep corrupting profile/loading temp profile?

Seems to be happing every few days. Have to create a new account then copy files back across. It's a dell pc and it's had a new hard disk in it and it's still doing it :(

Event view has recorded events of chkdsk running and repairing the drive but it's a brand new drive with a fresh install of windows.
 
Not seen any smart errors. But seems the MFT repairs every time on start up.


TU6lXNQ.jpg
 
The two most likely issues are either you have malware or you have a faulty HDD.

You likely won't see SMART errors in the event log. You need to run a special tool.

https://sourceforge.net/projects/smartmontools/

http://www.howtogeek.com/134735/how-to-see-if-your-hard-drive-is-dying/

Checking S.M.A.R.T. Without Third-Party Tools
To do a quick S.M.A.R.T. check without installing any third-party software, you can use a few commands included with Windows. First, open a Command Prompt window. (Press the Windows key, type Command Prompt, and press Enter.)

In the Command Prompt window, type the following commands, pressing Enter after each:

Code:
wmic

diskdrive get status
 
This is the order I would test..

SATA Cable
SATA Port
HDD
RAM
PSU
Motherboard
CPU

Was it a fresh Windows install after replacing the faulty drive? If not, try this..
 
Yeah was fresh install of windows 10 when the new drive went in.

It's like you set up a new profile then pretty much every 4-5days in goes to a temp one.
Set another one up and is fine. Then bang temp profile again.
 
If I had 1x NTFS error, I would be bricking it.

Having loads like this really isn't normal.

Run memtest86
Try another SATA cable
Try another SATA port

No point posting any more until you've done the above. Software changes won't cure this problem.
 
Back
Top Bottom