Wiring a push-to-break switch with 3 downlights - is this right? (Diagram included)

[Participant]

Hi all

I've bought a 2A switch that will break the circuit when our wardrobe door is closed. I also have 3 x 240V LED downlighters that I'm planning to install in the wardrobe so that they come on when the door opens.

Please could someone take a look at my proposed wiring diagram and check I've not done something stupid? The lights will only be drawing ~15W all together, so a 2A switch with 0.75mm flex should be fine I assume?

I've drawn the switched live in brown...obviously it'll be a blue cable but I'll sleeve it in brown.



Is this method correct and safe? Many thanks.

 

[Participant]

Hi again

I know no one replied but in case someone finds it useful, I wired it thusly in the end:



...after peeps on another forum pointed out that there was no need for the j/b on the left.

Only one light visible in this pic:



Did it this afternoon, took about 3 hours (a pro could probably have done it in about 1.5 ).