Wont load

Dragom · 8 Dec 2014 at 16:57

My pc parts http://imageshack.com/a/img674/66/SxS92h.png

Hello, I nudged my table and my PC froze. I turned it off via PSU on off switch, but it wont turn back on and my monitor light stays orange(sleep,off). I did remove every part and unplugged every cable, but that did not help. I did restart CMOS with button on Motherboard twice when system was off. Unplugging HDD and turning on achieves nothing. It wont load in BIOS. I find it weird that led on my GPU stays on (it should turn off as it loads in windows). I do not know my RMA codes and frankly I do not know which part responsible for this. My monitor has only one VGA port (it is old). Switched ram positions and tried with 1 module with same fan spinning no bios result. Thank you for helping me out

DaleTheWhale · 8 Dec 2014 at 17:08

Outside of the case with just the CPU, 1 stick of RAM and the PSU.
See if it boots into the BIOS that way.

Case might now be shorting something and stopping the BOOT process.

Dragom · 8 Dec 2014 at 17:19

Is it okay if I add gpu ? (no hdmi on monitor and mobo does not beep)

DaleTheWhale · 8 Dec 2014 at 17:25

Would be nice to rule it out, but if it's your only option then yes it will be fine.

I'm assuming something has got mislodged/out of place and causing an issue.
HDD might have took the nudge badly and scratched/broke.
GPU might have come out of the slot slightly.

Many things, but is easier to start from scratch and build up.

Dragom · 8 Dec 2014 at 18:34

Well it was sketchy but it worked !!! haha thanks for the great help ;D How do I prevent that from happening in the future ? Yea I just assembled everything and it wont turn on again ;( It turned on once when in case and then I tried to secure gpu in place with screws and it went off. Could not make it run again.