Associate
Hi, just wondering if anyone else is experiencing probs with this. My box finished a 500+ point wu at 0500 today and still hasn't successfully u/ld it. Is it them or me?
WU Upload probs?
- Thread starter Viking
- Start date
Here you go.....
Coming right up, here's the relevant bit (I think)....
[05:58:07] Completed 250000 out of 250000 steps (100)
[05:58:21] Writing final coordinates.
[05:59:03] Past main M.D. loop
[06:00:11]
[06:00:11] Finished Work Unit:
[06:00:11] - Reading up to 2203008 from "work/wudata_02.arc": Read 2203008
[06:00:11] - Reading up to 4052028 from "work/wudata_02.xtc": Read 4052028
[06:00:11] goefile size: 0
[06:00:11] logfile size: 61560
[06:00:11] Leaving Run
[06:00:12] - Writing 6327736 bytes of core data to disk...
[06:00:18] ... Done.
[06:00:18] - Shutting down core
[06:00:18]
[06:00:18] Folding@home Core Shutdown: FINISHED_UNIT
[06:00:22] CoreStatus = 64 (100)
[06:00:22] Sending work to server
[06:00:22] + Attempting to send results
[06:00:43] Couldn't send HTTP request to server (wininet)
[06:00:43] + Could not connect to Work Server (results)
[06:00:43] (171.65.103.156:8080)
[06:00:43] - Error: Could not transmit unit 02 (completed July 24) to work server.
[06:00:43] Keeping unit 02 in queue.
[06:00:43] + Attempting to send results
[06:01:04] Couldn't send HTTP request to server (wininet)
[06:01:04] + Could not connect to Work Server (results)
[06:01:04] (171.65.103.156:8080)
[06:01:04] - Error: Could not transmit unit 02 (completed July 24) to work server.
[06:01:04] + Attempting to send results
[06:04:30] - Server does not have record of this unit. Will try again later.
[06:04:30] Could not transmit unit 02 to Collection server; keeping in queue.
[06:04:30] - Preparing to get new work unit...
[06:04:30] + Attempting to get work packet
[06:04:30] - Connecting to assignment server
[06:04:31] - Successful: assigned to (171.65.103.158).
[06:04:31] + News From Folding@Home: Welcome to Folding@Home
[06:04:31] Loaded queue successfully.
[06:04:41] + Attempting to send results
[06:05:02] Couldn't send HTTP request to server (wininet)
[06:05:02] + Could not connect to Work Server (results)
[06:05:02] (171.65.103.156:8080)
[06:05:02] - Error: Could not transmit unit 02 (completed July 24) to work server.
[06:05:02] + Attempting to send results
[06:05:03] Couldn't send HTTP request to server (wininet)
[06:05:03] + Could not connect to Work Server (results)
[06:05:03] (171.65.103.100:8080)
[06:05:03] Could not transmit unit 02 to Collection server; keeping in queue.
[06:05:03] + Closed connections
[06:05:03]
[06:05:03] + Processing work unit
[06:05:03] Core required: FahCore_78.exe
[06:05:03] Core found.
[06:05:03] Working on Unit 03 [July 24 06:05:03]
[06:05:03] + Working ...
[06:05:03]
[06:05:03] *------------------------------*
[06:05:03] Folding@Home Gromacs Core
[06:05:03] Version 1.90 (March 8, 2006)
[06:05:03]
[06:05:03] Preparing to commence simulation
[06:05:03] - Looking at optimizations...
[06:05:04] - Created dyn
[06:05:04] - Files status OK
[06:05:08] - Expanded 1380094 -> 7167049 (decompressed 519.3 percent)
[06:05:09] - Starting from initial work packet
[06:05:09]
[06:05:09] Project: 1811 (Run 5, Clone 49, Gen 1)
[06:05:09]
[06:05:13] Assembly optimizations on if available.
[06:05:13] Entering M.D.
[06:05:21] Protein: p1811_COL1_121_fragments
[06:05:21]
[06:05:21] Writing local files
[06:05:31] Extra SSE boost OK.
[06:05:33] Writing local files
[06:05:33] Completed 0 out of 500000 steps (0)
[06:32:59] + Attempting to send results
[06:33:20] Couldn't send HTTP request to server (wininet)
[06:33:20] + Could not connect to Work Server (results)
[06:33:20] (171.65.103.156:8080)
[06:33:20] - Error: Could not transmit unit 02 (completed July 24) to work server.
[06:33:20] + Attempting to send results
[06:33:22] Couldn't send HTTP request to server (wininet)
[06:33:22] + Could not connect to Work Server (results)
[06:33:22] (171.65.103.100:8080)
[06:33:22] Could not transmit unit 02 to Collection server; keeping in queue.
[08:18:34] Writing local files
[08:18:34] Completed 5000 out of 500000 steps (1)
[10:32:13] Writing local files
[10:32:14] Completed 10000 out of 500000 steps (2)
[12:33:22] + Attempting to send results
[12:33:43] Couldn't send HTTP request to server (wininet)
[12:33:43] + Could not connect to Work Server (results)
[12:33:43] (171.65.103.156:8080)
[12:33:43] - Error: Could not transmit unit 02 (completed July 24) to work server.
[12:33:43] + Attempting to send results
[12:33:44] Couldn't send HTTP request to server (wininet)
[12:33:44] + Could not connect to Work Server (results)
[12:33:44] (171.65.103.100:8080)
[12:33:44] Could not transmit unit 02 to Collection server; keeping in queue.
[12:47:33] Writing local files
[12:47:33] Completed 15000 out of 500000 steps (3)
[15:03:28] Writing local files
[15:03:29] Completed 20000 out of 500000 steps (4)
[17:22:23] Writing local files
[17:22:44] Completed 25000 out of 500000 steps (5)
[18:33:44] + Attempting to send results
[18:34:06] Couldn't send HTTP request to server (wininet)
[18:34:06] + Could not connect to Work Server (results)
[18:34:06] (171.65.103.156:8080)
[18:34:06] - Error: Could not transmit unit 02 (completed July 24) to work server.
[18:34:06] + Attempting to send results
[18:34:19] Couldn't send HTTP request to server (wininet)
[18:34:19] + Could not connect to Work Server (results)
[18:34:19] (171.65.103.100:8080)
[18:34:19] Could not transmit unit 02 to Collection server; keeping in queue.
And so it goes on, seemingly ad nauseum..
Didn't have any probs with first unit, and certainly don't want to lose this one...
Any ideas/suggestions, peeps?
Coming right up, here's the relevant bit (I think)....
[05:58:07] Completed 250000 out of 250000 steps (100)
[05:58:21] Writing final coordinates.
[05:59:03] Past main M.D. loop
[06:00:11]
[06:00:11] Finished Work Unit:
[06:00:11] - Reading up to 2203008 from "work/wudata_02.arc": Read 2203008
[06:00:11] - Reading up to 4052028 from "work/wudata_02.xtc": Read 4052028
[06:00:11] goefile size: 0
[06:00:11] logfile size: 61560
[06:00:11] Leaving Run
[06:00:12] - Writing 6327736 bytes of core data to disk...
[06:00:18] ... Done.
[06:00:18] - Shutting down core
[06:00:18]
[06:00:18] Folding@home Core Shutdown: FINISHED_UNIT
[06:00:22] CoreStatus = 64 (100)
[06:00:22] Sending work to server
[06:00:22] + Attempting to send results
[06:00:43] Couldn't send HTTP request to server (wininet)
[06:00:43] + Could not connect to Work Server (results)
[06:00:43] (171.65.103.156:8080)
[06:00:43] - Error: Could not transmit unit 02 (completed July 24) to work server.
[06:00:43] Keeping unit 02 in queue.
[06:00:43] + Attempting to send results
[06:01:04] Couldn't send HTTP request to server (wininet)
[06:01:04] + Could not connect to Work Server (results)
[06:01:04] (171.65.103.156:8080)
[06:01:04] - Error: Could not transmit unit 02 (completed July 24) to work server.
[06:01:04] + Attempting to send results
[06:04:30] - Server does not have record of this unit. Will try again later.
[06:04:30] Could not transmit unit 02 to Collection server; keeping in queue.
[06:04:30] - Preparing to get new work unit...
[06:04:30] + Attempting to get work packet
[06:04:30] - Connecting to assignment server
[06:04:31] - Successful: assigned to (171.65.103.158).
[06:04:31] + News From Folding@Home: Welcome to Folding@Home
[06:04:31] Loaded queue successfully.
[06:04:41] + Attempting to send results
[06:05:02] Couldn't send HTTP request to server (wininet)
[06:05:02] + Could not connect to Work Server (results)
[06:05:02] (171.65.103.156:8080)
[06:05:02] - Error: Could not transmit unit 02 (completed July 24) to work server.
[06:05:02] + Attempting to send results
[06:05:03] Couldn't send HTTP request to server (wininet)
[06:05:03] + Could not connect to Work Server (results)
[06:05:03] (171.65.103.100:8080)
[06:05:03] Could not transmit unit 02 to Collection server; keeping in queue.
[06:05:03] + Closed connections
[06:05:03]
[06:05:03] + Processing work unit
[06:05:03] Core required: FahCore_78.exe
[06:05:03] Core found.
[06:05:03] Working on Unit 03 [July 24 06:05:03]
[06:05:03] + Working ...
[06:05:03]
[06:05:03] *------------------------------*
[06:05:03] Folding@Home Gromacs Core
[06:05:03] Version 1.90 (March 8, 2006)
[06:05:03]
[06:05:03] Preparing to commence simulation
[06:05:03] - Looking at optimizations...
[06:05:04] - Created dyn
[06:05:04] - Files status OK
[06:05:08] - Expanded 1380094 -> 7167049 (decompressed 519.3 percent)
[06:05:09] - Starting from initial work packet
[06:05:09]
[06:05:09] Project: 1811 (Run 5, Clone 49, Gen 1)
[06:05:09]
[06:05:13] Assembly optimizations on if available.
[06:05:13] Entering M.D.
[06:05:21] Protein: p1811_COL1_121_fragments
[06:05:21]
[06:05:21] Writing local files
[06:05:31] Extra SSE boost OK.
[06:05:33] Writing local files
[06:05:33] Completed 0 out of 500000 steps (0)
[06:32:59] + Attempting to send results
[06:33:20] Couldn't send HTTP request to server (wininet)
[06:33:20] + Could not connect to Work Server (results)
[06:33:20] (171.65.103.156:8080)
[06:33:20] - Error: Could not transmit unit 02 (completed July 24) to work server.
[06:33:20] + Attempting to send results
[06:33:22] Couldn't send HTTP request to server (wininet)
[06:33:22] + Could not connect to Work Server (results)
[06:33:22] (171.65.103.100:8080)
[06:33:22] Could not transmit unit 02 to Collection server; keeping in queue.
[08:18:34] Writing local files
[08:18:34] Completed 5000 out of 500000 steps (1)
[10:32:13] Writing local files
[10:32:14] Completed 10000 out of 500000 steps (2)
[12:33:22] + Attempting to send results
[12:33:43] Couldn't send HTTP request to server (wininet)
[12:33:43] + Could not connect to Work Server (results)
[12:33:43] (171.65.103.156:8080)
[12:33:43] - Error: Could not transmit unit 02 (completed July 24) to work server.
[12:33:43] + Attempting to send results
[12:33:44] Couldn't send HTTP request to server (wininet)
[12:33:44] + Could not connect to Work Server (results)
[12:33:44] (171.65.103.100:8080)
[12:33:44] Could not transmit unit 02 to Collection server; keeping in queue.
[12:47:33] Writing local files
[12:47:33] Completed 15000 out of 500000 steps (3)
[15:03:28] Writing local files
[15:03:29] Completed 20000 out of 500000 steps (4)
[17:22:23] Writing local files
[17:22:44] Completed 25000 out of 500000 steps (5)
[18:33:44] + Attempting to send results
[18:34:06] Couldn't send HTTP request to server (wininet)
[18:34:06] + Could not connect to Work Server (results)
[18:34:06] (171.65.103.156:8080)
[18:34:06] - Error: Could not transmit unit 02 (completed July 24) to work server.
[18:34:06] + Attempting to send results
[18:34:19] Couldn't send HTTP request to server (wininet)
[18:34:19] + Could not connect to Work Server (results)
[18:34:19] (171.65.103.100:8080)
[18:34:19] Could not transmit unit 02 to Collection server; keeping in queue.
And so it goes on, seemingly ad nauseum..
Didn't have any probs with first unit, and certainly don't want to lose this one...
Any ideas/suggestions, peeps?
Phew
That's ok, then.
Thanks guys - mind at rest!
That's ok, then.
Thanks guys - mind at rest!