x570 Taichi Issue

[ljop]

For some reason I can't access the bios, if I press the correct function key or delete I just end up with a blank screen or a screen with a single - . I have tried the bios flashback button and have tried updating to the most recent bios. DrDebug doesn't provide any insight, as it still shows a9. The board will post/ tell me to insert boot media (the priorities must be incorrect as I have two m.2 drives, one with windows from my previous PC (in slot one, so should be a higher priority) and one new/empty), the board also allows me to attempt to run linux off of a USB stick).

Any ideas would be appreciated.

P.s I've tried 4 vs 1 stick of ram (It is CL16 3200mhz) and I've tried reseating the GPU.

 

[Plec]

You've probably tried this but as it's not mentioned above - have you tried a CMOS reset (full monty version) - unplug, deplete residual power by pressing power button and removing the battery for ~20 minutes?

 

[ljop]

You've probably tried this but as it's not mentioned above - have you tried a CMOS reset (full monty version) - unplug, deplete residual power by pressing power button and removing the battery for ~20 minutes?

I will try that tomorrow, as foolishly I didn't try that (only the clear button and shorting pin methods). I should've tried things on air first before putting it under water, as it is going to be a pain getting to the battery (why didn't they just put screws on the front of the board). I read elsewhere that it might be an M.2 issue, which still requires taking it all apart .

 

[ljop]

The issue seems to be with my Samsung M.2, I can access bios when it is not plugged in. The odd thing is it is a SM951, which is stated as compatible on the QVL.