Associate
- Joined
- 25 Jan 2021
- Posts
- 8
Hi Overclockers, and all the techie geeks!
It was time to upgrade my PC, so I have purchased a new ASUS UF Gaming X570-Plus (WiFi) along with the Ryzen 7 5800X, and 32GB DDR 360000 Vengeance LPX memory.
To go into and existing chassis with 600W Corsair Modula ATX power supply
After spending hours building the system, I turn it on....ready to bath in my own triumphant ability to put a PC together when......"Yellow LED" on board and no post....As you can imagine I didn't then spend the rest of the weekend playing games and enjoying the amazing new framerates!!! I spent another 6 hours reseating the CPU, changing RAM, reading posts....I have now officially given up.
This warning LED states a DRAM issue. I have taken the memory out and put it in another PC, and it works. I have also taken DRAM out of another PC onto this motherboard...same Yellow LED.
On reading-up it says it is a common fault with the CPU, so I have double checked that I have no bent pins...all looks fine.
So I am thinking it's either faulty CPU or faulty Motherboard. I don't have another Ryzen machine to test the CPU / Motherboard...
The only thing to note is that the AM4 socket is really smooth closing it, but when you try to open it its smooth until the last part where this is a little resistance and you feel it click (no physical noise). Only does that with the CHIP in socket. This may or may not be normal!
Any suggestions?
I have asked Overclockers for a return for them to check each component!
All help appreciated!...
Matt
It was time to upgrade my PC, so I have purchased a new ASUS UF Gaming X570-Plus (WiFi) along with the Ryzen 7 5800X, and 32GB DDR 360000 Vengeance LPX memory.
To go into and existing chassis with 600W Corsair Modula ATX power supply
After spending hours building the system, I turn it on....ready to bath in my own triumphant ability to put a PC together when......"Yellow LED" on board and no post....As you can imagine I didn't then spend the rest of the weekend playing games and enjoying the amazing new framerates!!! I spent another 6 hours reseating the CPU, changing RAM, reading posts....I have now officially given up.
This warning LED states a DRAM issue. I have taken the memory out and put it in another PC, and it works. I have also taken DRAM out of another PC onto this motherboard...same Yellow LED.
On reading-up it says it is a common fault with the CPU, so I have double checked that I have no bent pins...all looks fine.
So I am thinking it's either faulty CPU or faulty Motherboard. I don't have another Ryzen machine to test the CPU / Motherboard...
The only thing to note is that the AM4 socket is really smooth closing it, but when you try to open it its smooth until the last part where this is a little resistance and you feel it click (no physical noise). Only does that with the CHIP in socket. This may or may not be normal!
Any suggestions?
I have asked Overclockers for a return for them to check each component!
All help appreciated!...
Matt