Z77 Sabertooth Onboard Graphics?

jay-d · 28 Oct 2012 at 10:35

Hi Starting to build my new system, with a 3570k and sabertooth board,
i have a 7970 that displays graphics fine but I try and change to on board graphics using hdmi I get no output, also no IGPU settings in bios and also have updated bios but to no avail, thinking might have to rma

. wondering if you guys might no anything I could try?

Thanks Jay

jay-d · 28 Oct 2012 at 10:53

Sorry should have said I have tried it with the graphics card in and out of system.

There is no graphic settings in the bios, there say about the settings in the manual
but are not there on my system.

jay-d · 28 Oct 2012 at 11:05

No problem thinking about going for a
rampage formula as water-cooling.

Any z77 board you would recommend?

jay-d · 28 Oct 2012 at 11:45

Ok I will give it a go now thanks.

jay-d · 28 Oct 2012 at 12:35

Hi no still no good, flash bios again, cleared CMOS.
Just another point to add that the pcie slot light up red
Without graphics card. It's annoying when you've got issues
Like this I could be fitting my waterblock to graphics card.

jay-d · 28 Oct 2012 at 13:29

No option in bios at all for gpu, tried hdmi and display port.
Reseated CPU to check pins seem ok, might have to call it day
And go have my roast.

Thanks for your help on a Sunday much appreciated.