** PHANTEKS ENTHOO PRIMO - THE ULTIMATE WATERCOOLING CHASSIS **

Hi Guys

As many of you are no doubt aware from previous threads I have made, I am rather excited about the debut case from Phanteks.

The Enthoo Primo is the first case from Phanteks and has the enthusiast community very excited.

The case features new and innovative design features which you will not find on other chassis. The case has an obscene amount of watercooling potential and is the first case I can remember having reservoir and pump mounting hardware as part of its base spec.

I am aware that this ultra premium case may not be for everyone, but I am positive that every hardware enthusiast on here will see the potential of this and looks forward just as much as I do to the inevitable stream of multi GPU, watercooled monsters that this chassis release will spawn.

Our stock is due to arrive soon and we will have excellent allocation.

In the meantime, check out these preview videos that give a brilliant overview of the Enthoo Primo:



Gallery:

Top


Rear CM points


Pump mounting Brackets




SSD Mounting


Front Reservoir Bracket


Rear Reservoir Bracket


Pump Brackets


Case Rear


Pump Mount


Alternative Pump Mounting Locations


ODD Positions


PSU Locations


Case Plaque


External Shots








HDD Position One


HDD Position Two


IO Ports


Side Shot


Front Fans


Front Brushed Alu


Bottom Brackets


Air Filters


Case Floor


Case Floor Filters



Example Build Pictures














Phanteks Enthoo Primo Full Tower Case @ £199.99 inc VAT



The bar has been set to a new standard with Phanteks’ release of their first Enthoo series case.
Passionate about cooling and the one that brought you the world’s best air coolers, Phanteks enters
the case arena with their functional design with exceptional cooling possibilities, the Enthoo Primo.

Accessibility and functionality is what sets the Enthoo Primo on a level of its own. It was constructed
from a builder’s point of view with the closest attention to detail. This Enthoo Primo combines innovative
design and rich styling that appeal to builders of any caliber. A glimpse through the split window side
panel reveals the clean interior, capable of being water cooled, air cooled, or both.

Phanteks’ Enthoo Primo, unleash unlimited possibilities.

Specification:-
- Colour: Black / Blue LED
- Form Factor: Full tower
- 5 Phanteks’ PH-F140SP premium 140 mm fans included.
- Material(s): Aluminum faceplates, Steel chassis
- Motherboard support: ATX, EATX, mATX, SSI EEB
- Front I/O: 2x USB 3.0, 2x USB 2.0, Mic, Headphone, LED switch
- Side window: Yes, split-window design
- Expansion slots: 8
- Power Supply Slots: 2
- Dimension: 250(W) x 650(H) x 600(D) mm
- Warranty: 5 years

Driver Bays:-
- External 5.25” 5
- Internal 3.5” 6 (2x 3HDD cages)
- Internal 2.5” 12 (2x 3HDD cages + 2x doublestack SSD brackets
*expandable to 3x)

Cooling:- 120mm
- Front: 2x
- Top: 4x
- Side: 2x
- Rear: 2x
- Bottom: 4x
- HDD: 2x
- The PWM hub will enable PWM function to 3-pin fans. Total of 11 fans can be connected to the PWM hub.


Extensive water cooling support provides 5 different installation areas for slim and thick radiators varying from single to quad (120mm and 140mm form factors) with clearance for push-pull fan configurations.

Liquid Cooling Features:
- Reservoir Brackets
- Pump Bracket

Radiator Support:
- Front: Up to 240
- Top: Up to 480 or 420
- Side without HDD Cages: Up to 240
- Rear: 120 or 140
- Bottom: Up to 480 or 280

Clearance:-
- CPU cooler 207 mm
- Cable management 30 m



Only £199.99 inc VAT.

ORDER NOW

That is one big case! 30m just for cable management .
In all seriousness, that case looks epic!

Looks pretty nice

Does look very very nice indeed, but ouch on the price.

the price is very reasonable compared to the 900D

Exactly I like the 900 but the tag is a lot this will do most of what the 900d will do comes with a built in 11 fan controller and is 100 pound cheaper

I like that a lot. Shame it won't take HPTX.../negativity
If I had a more normal sized motherboard, this would be my case, no doubt. One small nitpick is that I would prefer a solid side panel.

Price is very reasonable for a premium case.

That is sleek. I think the price is fair compared to other cases in it's category!

wow very nice

Is that a built in (i.e. included) fan extender?

BaDBoY_uK said:

Is that a built in (i.e. included) fan extender?

Click to expand...

The PWM hub will enable PWM function to 3-pin fans. Total of 11 fans can be connected to the PWM hub.

Very nice and not a bad price really.

rjkoneill said:

Click to expand...

i really liked the case up until this image,

i find when they completely conceal the drive cages it makes the case look... cramped... and that thats the last thing you want to think on a high end case/rig

you can remove that if you wish. its all modular
watch the vids in the op

looks great , think ill be ordering one of these instead of the 810 switch

Wow where did this one come from? Not what I expected of phanteks!!

I can't get a good look as at work and on a phone, but what's the max radiator capacity of this??

lots of rads..

my favourite sort of case

pgi947 said:

Wow where did this one come from? Not what I expected of phanteks!!

I can't get a good look as at work and on a phone, but what's the max radiator capacity of this??

Click to expand...

Radiator Support:
- Front: Up to 240
- Top: Up to 480 or 420
- Side without HDD Cages: Up to 240
- Rear: 120 or 140
- Bottom: Up to 480 or 280

Awesome awesome awesome!!!

So basically takes as much as a 900d, looks as good as a 900d and costs £100 less.

Win.

Would I be right in saying this will take xl-atx?

Edit: expansion slots: 8, hmm look like there is room for a little overhang at the bottom rjk?

Edit 2: Had a better look, XL-ATX will not fit in any way shape or form, DAMNIT

Looks a decent case for a build.
Nice.