** THE BEST SELLING LCS IS BACK - Intel Liquid Cooling Solution - TS13X **

Hi Guys

Arriving next week we have the newest revision of the high performance Liquid Cooler from Intel

This is by far and away our best selling LCS unit.


Intel Liquid Cooling Solution - TS13X High Performance CPU Cooler @ £79.99 inc VAT



Designed by Intel for maximum cooling potential.

Compact, pre-assembled water cooling systems have been enjoying great popularity for some time. Intel is of course not escaped and has now brought the Thermal Solution TS13X a powerful cooling solution on the market. In this case, the set is aimed at the enthusiast Intel users who still want to put the finishing touches to its CPU. The strong cooling capacity, coupled with the quiet operation can beat any modders and overclockers heart beat faster.

Targeted for Enthusiasts and Overclockers.

Specification:
- Fan Speed: 800-2200RPM [PWM]
- Fan Dimensions: 120mm x 120mm x 25mm
- Fan CFM: 73.84CFM
- Weight: 820 g (complete set)
- Fan: 120mm LED (800-2200 rev / min, 21 - 35 dB (A), PWM-controlled, 125 m³ / h)
- Connector: 4-pin PWM
- Compatibility: Intel Socket 2011, 1366, 1156, 1155, 1150
- Hose length: about 32 cm
- Manufacturer Warranty: 3 years


Only £79.99 inc VAT.

ORDER NOW

looks pretty good ! how does it perform against the likes of H80/100's ?

Looks like a standard "Asetek" cooler with some kind of "Fan shroud" on that stock fan.

Performance remains to be seen, no reviews up so far. At least it looks cool.. You know, cool. Temperature cool. "ha ha".

Looks the same as their previous offering (which I have in a box somewhere), but with a different top/logo on the pump & block assembly. Not sure what improvements they've made though.

Is there one of these types of coolers that is 775 compatible? Yes I'm not upgrading anytime soon

Eames said:

Is there one of these types of coolers that is 775 compatible? Yes I'm not upgrading anytime soon

Click to expand...

Spending £80 on cooling for an 775 rig instead of keeping the £80, selling the 775 gear and then replacing the core system just seems silly

Be good to see some tests on these AIO's as there's been several new ones recently!

Just hope it works better than their marketing/translators!

I am of the opinion that they are all pretty hopeless. Ive had two Kuhler 620's, one was just about sufficient to keep my i7 930 at 3GHz without getting worryingly hot, and the other was just about enough to keep my 2500K at 4.2GHz in push-pull.

Even my H100 with a pair of Venom Vipers intaking cool air only keeps my 2500K at 75~ at 4.6GHz.

An air cooler that costs 20 or 30 quid less than this Intel AIO will put it to shame.

I'm looking at the H110 or the X60 and can't decide... A good deal is going to be the deciding factor I think as I am leaning towards the X60 for the aesthetics...

acme15 said:

Spending £80 on cooling for an 775 rig instead of keeping the £80, selling the 775 gear and then replacing the core system just seems silly

Click to expand...

He'll still need the £80 cooler...

CSA said:

looks pretty good ! how does it perform against the likes of H80/100's ?

Click to expand...

its the same as a h80 to all intents and purposes.

Make said:

Looks like a standard "Asetek" cooler with some kind of "Fan shroud" on that stock fan.

Performance remains to be seen, no reviews up so far. At least it looks cool.. You know, cool. Temperature cool. "ha ha".

Click to expand...

it is indeed. the difference is that the intel one is an intel one.

for this reason alone, it is by far and away the most popular. with it being an OEM solution from the CPU vendor, it has the biggest following

these were targeted as being the OEM cooler for 2011 when it was first released. so they are capable of 2011 temperatures.

you could always be ironic


Asetek AMD Mounting Kit (35-150-2000037) @ £2.99 inc VAT



Replacement AMD mounting hardware for all Circular Pump Asetek LCS CPU Coolers

Compatible with AMD Sockets

Works with the following cooling solutions:
- Alpenföhn -Wasser- All-In-One CPU Watercooling Solution
- Antec Kúhler H2O 620 Series 4 CPU Watercooler
- Antec Kúhler H2O 1220 Series 4 High Performance Liquid CPU Cooler
- Corsair Hydro H55 Quiet Liquid CPU Cooler
- Corsair Hydro H90 140mm High Performance Liquid CPU Cooler
- Corsair Hydro H110 280mm High Performance Liquid CPU Cooler
- Intel Liquid Cooling Solution - TS13X High Performance CPU Cooler
- NZXT KRAKEN X40 AIO Water Cooling Unit - 140mm
- NZXT KRAKEN X60 AIO Water Cooling Unit - 280mm
- Thermaltake Water 2.0 Pro CLW0216
- Thermaltake Water 2.0 Performer CLW0215
- Zalman CNPS20LQ CPU Liquid Cooler
- Zalman LQ310 Ultimate Liquid CPU Cooler
- Zalman LQ315 Ultimate Liquid CPU Cooler
- Zalman LQ320 Ultimate Liquid CPU Cooler

Only £2.99 inc VAT.

ORDER NOW

MoRT489 said:

He'll still need the £80 cooler...

Click to expand...

Even If he sells his core system for just £60, thats £140 which is enough for a used 2500K and a board. A stock 2500K with the stock cooler will destroy almost any socket 775 setup. You would have to have a Q9650 with a fair overclock to get even close.

And if he does have a Q9650 for example, then the core system would sell for a-lot more, meaning he could probably get a 2600K and a board, at which point there is no point even comparing.

acme15 said:

Even If he sells his core system for just £60, thats £140 which is enough for a used 2500K and a board. A stock 2500K with the stock cooler will destroy almost any socket 775 setup. You would have to have a Q9650 with a fair overclock to get even close.

And if he does have a Q9650 for example, then the core system would sell for a-lot more, meaning he could probably get a 2600K and a board, at which point there is no point even comparing.

Click to expand...

I think people underestimate the Q9x50 - though to be fair I was using some exotic RAM that allowed for stupidly high bus speeds. I upgraded my Q9550 @ 4GHz w/ GTX470 SLI to a 3770K and 9 out of 10 games were pretty much same speeds give or take*, no real difference in general desktop stuff - there was the odd thing that was a lot faster but unless I spent a large part of my day working with those apps it just wasn't worth the upgrade. Ended up selling it on.

* Couple of CPU bound games were significantly faster but weren't games I played much.

the arguing is pretty pointless.

775 is a dead socket.
intel do not produce 775 CPUs or Chipsets any longer

so there is no need for them to support it with their CPU cooler either.

a lot of CPU coolers that i am setting up at the moment from third party brands are omitting 775 support.

rjkoneill said:

you could always be ironic


Asetek AMD Mounting Kit (35-150-2000037) @ £2.99 inc VAT

Replacement AMD mounting hardware for all Circular Pump Asetek LCS CPU Coolers

Compatible with AMD Sockets

Works with the following cooling solutions:
- Alpenföhn -Wasser- All-In-One CPU Watercooling Solution
- Antec Kúhler H2O 620 Series 4 CPU Watercooler
- Antec Kúhler H2O 1220 Series 4 High Performance Liquid CPU Cooler
- Corsair Hydro H55 Quiet Liquid CPU Cooler
- Corsair Hydro H90 140mm High Performance Liquid CPU Cooler
- Corsair Hydro H110 280mm High Performance Liquid CPU Cooler
- Intel Liquid Cooling Solution - TS13X High Performance CPU Cooler
- NZXT KRAKEN X40 AIO Water Cooling Unit - 140mm
- NZXT KRAKEN X60 AIO Water Cooling Unit - 280mm
- Thermaltake Water 2.0 Pro CLW0216
- Thermaltake Water 2.0 Performer CLW0215
- Zalman CNPS20LQ CPU Liquid Cooler
- Zalman LQ310 Ultimate Liquid CPU Cooler
- Zalman LQ315 Ultimate Liquid CPU Cooler
- Zalman LQ320 Ultimate Liquid CPU Cooler

Only £2.99 inc VAT.

ORDER NOW

Click to expand...

Do you guys do an Intel 1155 fitting kit separate for one of these?

I've got one of the early revision 1 models currently being used on a Socket 2011 based system but, could do with some 1155 fitments so I can transfer it to another machine.

sadly not. only 2011 and AMD

Who's the OEM?

almighty15 said:

Who's the OEM?

Click to expand...

Asetek as usual.

The fan on this, for me, is like Schrödinger's fan. I hate it and like it at the same time.

I think it look nice, the way the frame slopes into the radiator, but I hate it because it's probably mediocre performance and they probably don't provide screws longer enough for a normal fan.