Associate
Hi there all, I was wondering if some of you tech heads out there could possibly check my overclock set up... its stable at the moment but my idle temps are around the 50c mark and it got me thinking maybe I can still tweak to improve the temps
Can anyone note anything that maybe not quite right ?
Updated with the help of the guys here - Stable on IBT and LinX
My PC spec is
HAF X Case
XMS3 6gb Ram
EX58-UD5 Motherboard
i7 920 Processor - clocked to 4ghz
GTX 480 Graphics Card - as stock
H70 Corsair CPU Cooler
Bios f12
idle temp 45c-47c Load 74max
My overclock is this
CPU Clock Ration - 20x
Advanced CPU Features
Turbo Boost - Disabled
CPU Cores Enabled - All
Everything else in this section disabled.
QPI Clock Ratio - x36
Uncore & QPI Features
Uncore Clock Ratio - x16 = 3200MHz
isochronous Support - Enabled
BCLK Frequency - 200
Advanced Clock Control
PCI Express Frequency - 100
C.I.A.2 - Disabled
CPU Clock Drive - 800mV
PCI Express Clock Drive 900mV
Performance Enhance - Standard
Extreme Memory Profile - Disabled
System Memory Multiplier - 8.0
Memory Frequency - 1600
Dram Timing Selectable - Quick
Cas Latency Time - 8
tRCD - 8
tRP - 8
tRS - 24
Command Rate - 2
Load-Line Calibration - Enabled
CPU Vcore - 1.35v
QPI / VTT Voltage - AUTO
IOH Core - AUTO
Dram Core - 1.66
Updated with the help of the guys here - Stable on IBT and LinX
mrix
Can anyone note anything that maybe not quite right ?
Updated with the help of the guys here - Stable on IBT and LinX
My PC spec is
HAF X Case
XMS3 6gb Ram
EX58-UD5 Motherboard
i7 920 Processor - clocked to 4ghz
GTX 480 Graphics Card - as stock
H70 Corsair CPU Cooler
Bios f12
idle temp 45c-47c Load 74max
My overclock is this
CPU Clock Ration - 20x
Advanced CPU Features
Turbo Boost - Disabled
CPU Cores Enabled - All
Everything else in this section disabled.
QPI Clock Ratio - x36
Uncore & QPI Features
Uncore Clock Ratio - x16 = 3200MHz
isochronous Support - Enabled
BCLK Frequency - 200
Advanced Clock Control
PCI Express Frequency - 100
C.I.A.2 - Disabled
CPU Clock Drive - 800mV
PCI Express Clock Drive 900mV
Performance Enhance - Standard
Extreme Memory Profile - Disabled
System Memory Multiplier - 8.0
Memory Frequency - 1600
Dram Timing Selectable - Quick
Cas Latency Time - 8
tRCD - 8
tRP - 8
tRS - 24
Command Rate - 2
Load-Line Calibration - Enabled
CPU Vcore - 1.35v
QPI / VTT Voltage - AUTO
IOH Core - AUTO
Dram Core - 1.66
Updated with the help of the guys here - Stable on IBT and LinX
mrix
Last edited: