*** Lancool Dragon-Lord Series - Coming Soon ***

[Ace Modder]

Lancool Dragon-Lord PC-K62 Mid Tower Case with Window - Black (No PSU)

The Dragon Lord K serires builds LanCool’s high standard of Quality requirement. This SECC steel cases with completely tool-less design are the perfect complement to a PC gamer’s needs. The cutting edge tool-less design is an important key feature in the new LanCool cases. The LanCool design team considered end user requirements, especially home-builders allowing for faster component swapping. The new internal layout has the motherboard on top of the power supply unit, which allows for easier access to the motherboard as well as more room above, thus larger CPU coolers can be used. The power supply unit at the bottom of the case is cooled with fresh cool air directly from the outside of the case. The Dragon Lord K62 uses large size cooling fans to remove the system heat faster and quieter as well as keeps the system more stable. The interior has a great all black look which is showcased via the great looking clear side window.

- Motherboard Compatability: ATX & M-ATX
- Side Panel & Body: CECC Steel
- Front Bezel: Plastic
- 5 x 5.25" Drive Bays
- 4 x 3.5" Drive Bays
- Cooling : 1 x 140mm Blue LED Front Fan (included), 1 x 140mm Blue LED Top Fan (included) & 1 x 120mm Rear fan (included)
- I/O Ports: 2 x USB2.0 & 1 x Audio

Only £85.99 inc VAT.

PRE-ORDER NOW
----------------------------------------------------------------------
Lancool Dragon-Lord PC-K58 Mid Tower Case - Black (No PSU)

The Dragon Lord K serires builds LanCool’s high standard of Quality requirement. This SECC steel cases with completely tool-less design are the perfect complement to a PC gamer’s needs. The cutting edge tool-less design is an important key feature in the new LanCool cases. The LanCool design team considered end user requirements, especially home-builders allowing for faster component swapping. The new internal layout has the motherboard on top of the power supply unit, which allows for easier access to the motherboard as well as more room above, thus larger CPU coolers can be used. The power supply unit at the bottom of the case is cooled with fresh cool air directly from the outside of the case. The Dragon Lord K58 is equipped with large cooling fans, with low RPM, which still provide enough air flow to cool down the hardware adequately. The front 140mm intakes fan runs at 1000RPM. The top two silent 140mm ball-bearing fans exhaust the hot air out at 1000RPM. All the intake fans are aligned with inlet holes on the bezels. These are equipped with air filters to stop the dust and keep the internals dust free and clean.

- Motherboard Compatability: ATX & M-ATX
- Side Panel & Body: CECC Steel
- Front Bezel: Plastic
- 5 x 5.25" Drive Bays
- 4 x 3.5" Drive Bays
- Cooling : 1 x 140mm Front Fan (included) 1 x 120mm Rear fan (included)
- I/O Ports: 2 x USB2.0 & 1 x Audio

Only £59.98 inc VAT.

PRE-ORDER NOW

 

[Yewen]

Antec 902 watch out on these.

 

[Helios1234]

Antec 902 watch out on these.

I was gonna say, those lancools look like an excellent alternative to the Antec 902. The sprayed interior hides the dull steel look and it offers all the benefits and cooling of the PC-P50!

 

[Blackhawk47]

Top one looks great with the black interior but I am not very keen on the front of it.

 

[Columbo]

With the looks of that 2nd case the CM690 might be knocked off the top as best value case imo.

 

[EdGey]

looks nice

depends what the mesh on the front is like though, looks abit like the cheap n nasty stuff you find on coolermaster lower end cases.

 

[mjones1]

The mesh does look rather thin which means a lot of noise will come out and lighting if your not into it.

 

[rikky]

Found a video for this case on Youtube .... looks to have some pretty awesome features and very good design indeed - tool-less everything including PSU!!

Also at that price I think it is a bit of a bargain when you consider what the competition offer.

 

[~>Dg<~]

hmmm at first thought it looked a bit ok now i seen that youtube video does look very well thought out and a good case.

 

[Clairvoyant]

Just watched that youtube video. Looks like a great case.

 

[bilston]

Looks great, but can you put a 120.2 rad in the top under the fans?

 

[pastymuncher]

Pity it's yet another case that blocks the front intake fan by putting the hdd bays side on.

 

[fross]

Looks like an awesome case, especially like the black interior.

As for having the HDD bays side-on, there is still space between the bays the same as if they were the conventional way round. I much prefer them angled this way for easy access.

 

[bilston]

The video about the case says that it's removable and rotatable

 

[BloomerzUK]

Pity it's yet another case that blocks the front intake fan by putting the hdd bays side on.

If you watched the video, it clearly shows you can turn the HDD bay side on

 

[Raikiri]

They appear to be made from plastic

 

[radar19]

Oh yeah! Been waiting for OCUK to get these in! I'll be getting the PC-K62 if I get to uni to replace my 300.