-= Lancool Dragon-Lord Cases - IN STOCK NOW =-

[Ace Modder]

Lancool Dragon-Lord PC-K58 Mid Tower Case - Black (No PSU)

The Dragon Lord K serires builds LanCool’s high standard of Quality requirement. This SECC steel cases with completely tool-less design are the perfect complement to a PC gamer’s needs. The cutting edge tool-less design is an important key feature in the new LanCool cases. The LanCool design team considered end user requirements, especially home-builders allowing for faster component swapping. The new internal layout has the motherboard on top of the power supply unit, which allows for easier access to the motherboard as well as more room above, thus larger CPU coolers can be used. The power supply unit at the bottom of the case is cooled with fresh cool air directly from the outside of the case. The Dragon Lord K58 is equipped with large cooling fans, with low RPM, which still provide enough air flow to cool down the hardware adequately. The front 140mm intakes fan runs at 1000RPM. The top two silent 140mm ball-bearing fans exhaust the hot air out at 1000RPM. All the intake fans are aligned with inlet holes on the bezels. These are equipped with air filters to stop the dust and keep the internals dust free and clean.

- Motherboard Compatability: ATX & M-ATX
- Side Panel & Body: CECC Steel
- Front Bezel: Plastic
- 5 x 5.25" Drive Bays
- 4 x 3.5" Drive Bays
- Cooling : 1 x 140mm Front Fan (included) 1 x 120mm Rear fan (included)
- I/O Ports: 2 x USB2.0 & 1 x Audio

Only £59.98 inc VAT.
BUY NOW

 

[Ace Modder]

Lancool Dragon-Lord PC-K62 Mid Tower Case with Window - Black (No PSU)

The Dragon Lord K serires builds LanCool’s high standard of Quality requirement. This SECC steel cases with completely tool-less design are the perfect complement to a PC gamer’s needs. The cutting edge tool-less design is an important key feature in the new LanCool cases. The LanCool design team considered end user requirements, especially home-builders allowing for faster component swapping. The new internal layout has the motherboard on top of the power supply unit, which allows for easier access to the motherboard as well as more room above, thus larger CPU coolers can be used. The power supply unit at the bottom of the case is cooled with fresh cool air directly from the outside of the case. The Dragon Lord K62 uses large size cooling fans to remove the system heat faster and quieter as well as keeps the system more stable. The interior has a great all black look which is showcased via the great looking clear side window.

- Motherboard Compatability: ATX & M-ATX
- Side Panel & Body: CECC Steel
- Front Bezel: Plastic
- 5 x 5.25" Drive Bays
- 4 x 3.5" Drive Bays
- Cooling : 1 x 140mm Blue LED Front Fan (included), 1 x 140mm Blue LED Top Fan (included) & 1 x 120mm Rear fan (included)
- I/O Ports: 2 x USB2.0 & 1 x Audio

Only £85.99 inc VAT.

BUY NOW

 

[PhillyDee]

Wow, Good price for what looks a quality case!

 

[Shawreyboy]

Nice price and very similar in style to some of the beautiful looking Lian Li cases.

 

[dr4g0nf1y]

I'd personally rather spend £5 more of so for the 902. Larger top fan and two fans on the front.

I do like the floor space for the psu but I still don't believe that the height off the feet will be efficient enough.

Personally Lian li cases are over priced for what they provide

 

[RichieUK]

Just when i thought i wasn't going to find a case i like, this comes along. Looks really nice and functional.

btw - Doesn't this case have dual 140mm fans on the top? Says 1 in the description.

 

[Mal X]

I thought i was looking at an Antec 300, i must give up working nights...my eyes are so tired

 

[Xappy]

Well to be fair this does look like an Antec 300's older relative.

 

[dr4g0nf1y]

hmm, saying this I'm tempted with it because of the better side window, but still don't like the single front fan

 

[Ace Modder]

This video shows some great features.

 

[Xappy]

That video makes them look a lot better than the pictures.

 

[dr4g0nf1y]

I'm a little more interested now.

would the lian-li hard drives caddies with the fans work the same as antecs fan blocks on the front if I popped one in?

my only concern is that I have compete horizontal air disruption with 900/902/1200

 

[Ace Modder]

That video makes them look a lot better than the pictures.

Yes, pictures cannot do it justice.

 

[cook001]

Woo hoo

My k62 is coming tommorrow.I can hardly wait
It should be great.The other lanccool case is used the other day had great build quality.
Also i'am thinking of swapping the stock fans for xigmateks.

 

[Slinkie]

I ordered one too, looks great. I hadn't watched the video as it didn't work while I was work but seeing it now has made it seem even more of a bargain. I am moving from a Lian Li A05 as I am going to change to an SLI set up (second card is coming with the case) and it looks like there is loads of room for this!

Looks like we got the last few, they are now out of stock!

 

[rick fowler]

hmm that looks nice is it better than the haf932 case,i was looking into one with a side panel like that and blue lighting instead of the red at front i got now.might be time to sell the haf932 lol

 

[Colossus]

Good overview of the case. I think they are on to a winner personaly.

 

[petriodet]

has anybody actually bought this case?
if you have post some pics of it in action please.

 

[Slinkie]

I'll put a build log on when I get the time to transfer my pc in to it, it'll probably be saturday. If you have any specific questions about the case let me know.

 

[rick fowler]

yeah how loud are the fans at full speed,will this fit my watercooling in see link in sig for details,really like the look of it all but wanna make sure it fits in nice and all,please let me know and also when you getting more in stock then?

ps Lancool Dragon-Lord PC-K62 Mid Tower Case is the one im interested in