e2140 on asus p5kpl-am epu

pastymuncher · 27 Nov 2009 at 19:32

Careful pikey367 or Wayne will send you to the corner with your hands on your head.

kiel367 · 27 Nov 2009 at 19:33

haha i dont mind being shouted at as long as i get a better speed from my chip at the end xD

Big.Wayne · 27 Nov 2009 at 19:57

pikey367 said:

Cool!

Now go back to BIOS >> Jumperfree Config and load the +5% overclock profile . . .

kiel367 · 27 Nov 2009 at 20:20

ok iv done that my dram frequency is now at 350mhz fsb:dram 3:5

kiel367 · 27 Nov 2009 at 20:28

tried 10% my core speed is now 880.0 mhz and my dram is 244 fsb:dram 3:5

Big.Wayne · 27 Nov 2009 at 20:36

+5%
+10%
+15%
+20% fingers crossed . . .

dandan1212 · 27 Nov 2009 at 20:41

hi wayne its me dan the window man...lol. ...

kiel367 · 27 Nov 2009 at 20:51

working at 20% 1.93ghz 400mhz dram freq and 3:5

Big.Wayne · 27 Nov 2009 at 21:08

dandan1212 said:
hi wayne its me dan the window man...lol. ...

Lol Hi Dan, didn't expect you to pop up in this thread!

Welcome to OcUk forums, please read the forum rules and enjoy your stay

Oh and thanks for sorting that screw out, did you do the door btw as its still a bit clunky heh!

bare with me dude as I'm just helping little ***** get some overclocking done!

pikey367 said:
working at 20% 1.93ghz 400mhz dram freq and 3:5

That's a 20% overclock under your belt and that's just about as far as you can go with that board heh, lets see a CPu-z screenie please with both the [CPU] tab and the [Memory] tab in the same shot (you can open CPU-z multiple times), then load up Coretemp and Prime95 and run Toture Test >> Blend for a while *or* chill out and do some gaming, see if that clock is stable!

Beyond that I'm not sure if we can go much further because if the FSB gets raised anymore your Memory will be overclocked beyond 400MHz (DDR2-800) which it may not like . . . Sadly the Asus P5KPL-AM EPU doesn't allow you to adjust the memory any slower than what it is so if you wanna continue on overclocking you will need faster RAM £££

Let me know if thats stable and at least we can try to set-up the same overclock manually (i.e not using the +20% overclock profile) . . .

dandan1212 · 27 Nov 2009 at 21:10

Big.Wayne · 27 Nov 2009 at 21:13

dandan1212 said:

Resave the image to a .jpg and upload it here

[edit] no wait heh, I wanted to see a Screenie from pikey367 not you Dan!

kiel367 · 27 Nov 2009 at 21:15

Big.Wayne · 27 Nov 2009 at 21:17

Oops you still got the multi at [x6], change it to [x8] and hope it works!

Big.Wayne · 27 Nov 2009 at 21:20

Double oops, did you change the multi back or is that Enhanced Intel Speed-Step (EIST) kicking in? . . . does the CPU multi love up to [x8] when you run prime?

Big.Wayne · 27 Nov 2009 at 21:23

Triple oops, check out the hacks on *****'s desktop!

dandan1212 · 27 Nov 2009 at 21:25

dandan1212 · 27 Nov 2009 at 21:26

dandan1212 said:

ok that was just a tester im new to posting images via url...lol

Big.Wayne · 27 Nov 2009 at 21:26

Not overclocked Dan?

test away dude, thats not bad for a second attempt!

dandan1212 · 27 Nov 2009 at 21:27

Big.Wayne said:
Not overclocked Dan?

test away dude, thats not bad for a second attempt!

no mate not overclocked yet but will do some time

Big.Wayne · 27 Nov 2009 at 21:30

Cool, well this is the forums where I hang out a lot, be careful though if you spend much time here you will find yourself wanting to upgrade!

This place is full of hardware addicts who build a new computer every two weeks!

Lots of good info, check out the different hardware sections and also you may like the gaming section!

Hope you had a good journey home, loving your work!