Coolit ECO ALC temps on AMD Phenom II X4 955

stanton4958 · 21 Apr 2010 at 20:32

Coolit ECO ALC /H50-1 /temps on AMD Phenom II X4 955

what sort of temps are peeps getting on the AMD Phenom II X4 955 Black Edition Quad-Core Processor

McstylisT · 21 Apr 2010 at 21:59

Its within its thermal allowance from my knowledge. So your alright there.

stanton4958 · 21 Apr 2010 at 22:02

McstylisT said:
Its within its thermal allowance from my knowledge. So your alright there.

nice 1

DELETED_83755 · 21 Apr 2010 at 23:42

What kind of voltages are you running to get it to run at 3.9 Ghz??

Thats very reasonable and mighty quiet no? My phenom II x4 955 @ 3.6 and 1.4v hits about 50 degrees! The cooler fan maxes out at that speed so is loud as you can imagine!

stanton4958 · 22 Apr 2010 at 09:56

teddy3578 said:
What kind of voltages are you running to get it to run at 3.9 Ghz??

Thats very reasonable and mighty quiet no? My phenom II x4 955 @ 3.6 and 1.4v hits about 50 degrees! The cooler fan maxes out at that speed so is loud as you can imagine!

put it down to see what temps i am getting 3.6GHZ

IDLE/26/29
FULL LOAD/39/40
try resitting your CPU cooler--HOPE THIS HELPS

AND THIS IS WHAT I SET IT AT TO GET 3.9ghz

HeX · 22 Apr 2010 at 10:05

I'm getting 26C idle, 47C load @ 3.8GHz 1.36V (under load) using a H50-1 and low RPM fan.

DELETED_83755 · 22 Apr 2010 at 10:30

I think you guys have a very good of a chip, mine is one of the earlier C2 Phenom II x4 955 pretty much a few months after they came out.

I can't get it to run any more than 3.6 Ghz at 1.4v. And at stock speed its 1.35 v. So its just the higher voltages I need to get it stable, so thats making it hotter than usual. Voltages make the temps higher.

stanton4958 · 22 Apr 2010 at 10:33

HeX said:
I'm getting 26C idle, 47C load @ 3.8GHz 1.36V (under load) using a H50-1 and low RPM fan.

i think the H50-1 is better than coolit eco, but theres not much in it tho

stanton4958 · 22 Apr 2010 at 11:50

HeX said:
I'm getting 26C idle, 47C load @ 3.8GHz 1.36V (under load) using a H50-1 and low RPM fan.

just reset my coolit eco and my temps are way better

this has been at full load for 2hrs i am running at 3.8GHz

HeX · 22 Apr 2010 at 11:58

stanton4958 said:
just reset my coolit eco and my temps are way better

this has been at full load for 2hrs and it beets the h50-1, i am running at 3.8GHz

Your fan is running twice the RPM of mine, and you are using less volts, so can't really do a direct comparison.

Also I was using Prime95 Blend to test temperatures.

DELETED_83755 · 22 Apr 2010 at 12:24

stanton4958,

Have you ran prime95 or something like OCCT for at least an hour? Don't think the built in AMD overdrive in a good enough test for stability to be honest.

stanton4958 · 22 Apr 2010 at 14:23

Your right

HeX said:
Your fan is running twice the RPM of mine, and you are using less volts, so can't really do a direct comparison.

Also I was using Prime95 Blend to test temperatures.

Never thought of that,done a blend test on prime95 getting 47,49 full load so h50 is defo better soz about that.and the power fan is conected to the pump that's what's flat out

HeX · 22 Apr 2010 at 14:30

Don't worry mate it's not a competiton, just posted my temps for comparison

Might be your PC's in a warmer room than mine, or my case has better airflow, or a load of other reasons.

Eitherway, you are getting good temps, so don't worry

stanton4958 · 22 Apr 2010 at 16:14

any 1 out there

any 1 out there who is using a coolit eco alc with a 955 just want to no what temps other peeps are getting. o and me 3.9ghz OC whent bad,

temps hit 60c so dont even go there with this cooler lol

DELETED_83755 · 22 Apr 2010 at 16:36

Try running it at 3.8, over 3.8 the phenom IIx 4 955 needs a lot higher voltage to keep it stable.

stanton4958 · 22 Apr 2010 at 17:04

teddy3578 said:
Try running it at 3.8, over 3.8 the phenom IIx 4 955 needs a lot higher voltage to keep it stable.

have been need running at 3.8ghz V 1.35/1.40 ANYTHING ABOVE 1.4V temp maxis out at 55c

stanton4958 · 22 Apr 2010 at 20:42

Dead

Well had this for two days and the pump is gone, gutted done 4 hrs of prime95 and then it started making a mad sound and then my CPU whent past 62c and I ripped the power cord out lucky the thing dident blow up

Do not get this, it is crap

DELETED_83755 · 22 Apr 2010 at 23:19

Ah man, have you tried rebooting since that happened??

Just check the mounting

Have you still got the stock cooler or some other cooler till you get a replacement??

stanton4958 · 23 Apr 2010 at 09:42

It's dead

teddy3578 said:
Ah man, have you tried rebooting since that happened??

Just check the mounting

Have you still got the stock cooler or some other cooler till you get a replacement??

It's well gone put stock cooler back on.

barrolde · 23 Apr 2010 at 21:43

stanton4958 said:
It's well gone put stock cooler back on.

Hi Stanton - this is Barry w/ CoolIT. Did you submit an RMA request w OCUK or w/ us directly?

Can you please tell me how you had that pump plugged in? The pump is 12v only so if you had it on a regulated fan header it could have damaged it. It may be that you had it plugged in correctly and it just died.. somtimes that happens w/ any mechanical components but we have many 10's thousands of those pumps in the field w/ well below a 2% failure rate so I just want to make sure we find the cause of the failure.

Regards,

Barry