Titan Xenomorph Blue Screening

cr!spy

cr!spy

cr!spy

Associate
Joined
6 Oct 2004
Posts
572
Location
Kent
Hi guys,

I bought a Titan Xenomorph a few weeks ago, it's been running absolutely fine with me gaming on it for 5+ hours at a time and then yesterday it started blue screening. Seems a bit strange that it's only just started doing it, so I'm not sure whether it's the overclock or not. I have lowered it from 4.2GHz down to 4.0GHz to see whether that makes a difference, but I didn't get long enough to test it out.

Any ideas?
 
iam not a professional but i would speak to ocuk about it seeing they were the ones who built it for you and sold you it. they would have more knowledge on your current setup than most people
 
They usually save the profiles in the BIOS, so try resetting it then loading the preset profile.

If temperatures are fine, perhaps up the voltage on the cpu one notch just for safety.
 
MooMoo444 said:
They usually save the profiles in the BIOS, so try resetting it then loading the preset profile.

If temperatures are fine, perhaps up the voltage on the cpu one notch just for safety.
Click to expand...

Oh cool, didn't know that. I'll do that tonight then, cheers!

Just seems a bit strange that it's been working fine until yesterday - I haven't played with any of the BIOS settings or changed any drivers. Only thing that has changed was it got quite a few Windows updates when I turned it on yesterday. :confused:

What should the temp be roughly at 4.2GHz on an i3? Also max voltage?
 
Well... I reloaded the OcUK profile in the bios and it seemed to do the trick for a day, but it's started doing it again now. It seems that when I reload the profile it works for a day and then starts blue screening again. I did however notice that when it reboots after the blue screen it comes up with some message about SATA being in IDE mode? When I reload the OcUK overclock in the bios it sorts it out and doesn't crash again for another day.

Any ideas :confused:
 
I'm just running prime now temps are sitting just below 60. It should be 100% stable as ocuk should have done this already.
 
Failed the test after 50mins. I think that's really bad of ocuk! Obviously hasn't been tested properly! Not happy!
 
You must log in or register to reply here.
Back
Top Bottom