i7 [email protected] temps

speedyj · 2 Oct 2010 at 17:24

Running at 21x191, CPU voltage 1.22500, QPI/DRAM voltage 1.21875

Using a TRUE Black with 1 x NF-P12

Room is at 23 Degrees

Idles at
c1 43
c2 37
c3 42
c4 38

Ran Prime for a few hours and got
c1 76
c2 72
c3 73
c4 72

How does this compare to others and would putting a 2nd NF-P12 on in push / pull make much difference.

vectisitch · 2 Oct 2010 at 17:27

you must have a great chip there with those low [email protected] would say those temps are fine with that cooler

speedyj · 2 Oct 2010 at 17:38

Lets hope so, got it off MM for a good price not long ago.

I am tempted to go down the water route as I have not really OC'd properly since using phase change several years ago, could be fun.

q6600 · 2 Oct 2010 at 17:48

oau !!!
1.22 cpu v oau again.

vectisitch · 2 Oct 2010 at 17:53

i used a titan fenrir on my i7 930 vcore at 1.25 temps were around 90.changed to a coolit eco temps were around 88.changed to a noctua nh-d14 and temps were around 74,i've just changed to custom water and the temps are 55

speedyj · 2 Oct 2010 at 18:01

q6600 said:
oau !!!
1.22 cpu v oau again.

Sorry, you've lost me!

q6600 · 2 Oct 2010 at 19:33

you have a nice pice of cpu there. with so low v to reach 4.00. you cpu can pass the intel burn test with that voltage?

speedyj · 2 Oct 2010 at 23:28

Yes it passes burn test at that setting.

Burn test does not seem to stress the 4 cores as much as Prime does according to Core Temp.

q6600 · 3 Oct 2010 at 18:17

yes and no my i 7 950 will pass prime 95 @ 4.00 with 1.25 but i will get a bsod on intel burn test with 4.00 and 1.25 v cpu. to pass intel burn test i need 1.29 on cpu voltage. and that is on standard test i didn't try the extreme one