New MOT rules next year?

sounds like rubbish tbh, tho IMO failing people with HID's in Halogen headlights sounds great, maybe stop the mobile strobe lights that blind half the carriageway...

*EDIT*

The funny thing is although it sounds like twaddle I could see them doing it, I remember when the 2010 changes made removal of power steering from cars that had it as standard an MOT fail. Everyone laughed at the news at the time.
 
Last edited:
Easy to spot as Xenon cars have suspension level sensors, in car beam adjuster, and usually headlight washers.

Well researched peice, given that a car with an automatic level sensor will NOT have an incar beam adjuster. And 'usually' headlight washers?
 
[TW]Fox;17748311 said:
Well researched peice, given that a car with an automatic level sensor will NOT have an incar beam adjuster. And 'usually' headlight washers?

This is what I was thinking, the only car I had with xenons had no manual adjustment (they did a jazzy self levelling routine when you switched them on) and I thought cars with xenons had to have washers...
 
What a crap article, it's like the person who wrote it has regurgitated what his mate Dave down the pub told him.
 
remapped ecus

i know the bosch me7 system actually has a counter to record the instances the ecu has been accessed and alterations made. the counter can be reset too ;)

so unless they will scan through the table after table of parameters i cant see this happening or having any point at all.

what if you have a custom car on MS etc?

load of borrocks
 
Yeah, a lot of Integra guys were going nuts over it on the Honda forums a while back

I really doubt this; are you sure the issue isn't people disconnecting the hydraulics from a PAS rack and using it as a manual rack (which is a stupid thing to do), rather than fitting a proper manual rack?
 
I really doubt this; are you sure the issue isn't people disconnecting the hydraulics from a PAS rack and using it as a manual rack (which is a stupid thing to do), rather than fitting a proper manual rack?

Its on http://www.motuk.co.uk/manual_230.htm in the guidelines as an MOT fail

Power steering malfunctioning or inoperative or evidence that power assistance has been removed or disconnected when it is known that power steering is standard on the vehicle.
 
That's the thing that stands out for me at the moment. If this was true people in the modding scene would be in total uproar!

MOT is to test weather a car is safe and roadworthy surely and having a remap doesn't change either of those facts.
 
The car/light goods vehicle MOT test is about to change – the European Commission has changed the Directive that covers it. We take a look at when these changes are likely to come into effect and what they mean for MOT testers.

Britain has been testing vehicles under the MOT scheme for 50 years now. Last year, the European Directive covering the MOT test was updated and revised by a modern version called 2009/40/ EC. This was then updated by 2010/48/EU, which was ratified on 5 July this year.
The new Directive keeps the EU minimum 4-2-2 test frequency but adds a number of new elements to the British MOT test. The Directive anticipates all test changes being in place by 1 January 2012, and a common European approach to test certificates in place by 1 January 2014. So what is VOSA doing to introduce the changes?
In terms of test frequency, in mid-July the coalition government confirmed that it intends ‘to look at the issue of MOT test frequencies later this year’. VOSA contributed statistical data to inform the last review in 2008, and we expect that our computer system and the data you have entered will be utilised again in much the same way.
We expect to hear more details of the government’s review proposals later in the year.
As far as changes to the test content are concerned, VOSA has already been analysing the requirements of the new Directive and working out how to implement them. We started this earlier in the year by talking with representatives of the MOT trade at our regular Trade User Group and VTS Council meetings. Both VOSA and the Department for Transport (DfT) are keen to ensure that any changes to the test are introduced in as practical a way as possible, keeping the burden on the trade to a minimum and ideally keeping the changes cost neutral.
In many cases, the changes shouldn’t necessarily lead to an increase in average test times. A good example is the malfunction indicator lamps on the dashboard that indicate defective electronic power steering, electronic stability control and secondary restraint systems. Testers already check the dashboard for other lamps, so no extra time would be required for this addition to the test.
Electrical wiring and batteries are now included in the test’s scope, but testers already check the vehicle structure where wiring is secured – often along the same routes as other testable items, such as brake pipes in the engine compartment. So again, this doesn’t look like an additional burden on the tester. In the pre-computerisation days, testers often (wrongly) failed vehicles for insecure batteries, so they must have been looking at them then! Now, it means that when we implement the new Directive, vehicles can legitimately fail for battery insecurity, for no extra tester effort.
Other items – such as headlamp bulb and unit incompatibility, headlamp levelling devices and illegal engine ‘chipping’ – will need further thought before we can get a workable solution for MOT stations.
Some of the new items may require extra effort on the part of the tester – when we know for sure what that is we’ll be talking again with our trade and DfT colleagues to work out what the impact will be.
The common EU test certificate should be relatively easy to achieve – the only data that the Directive expects and that we don’t currently provide is the symbol for the vehicle’s country of origin. Probably 99% of vehicles tested will have
‘UK’ entered here, but if you do test vehicles with a foreign plate, you will need to enter the correct country symbol. We may even be able to make this change earlier if there is a convenient opportunity.
The MOT trade can rest assured that VOSA is working closely with you to introduce any new elements as efficiently and effectively as possible, with the minimum of fuss. Just as importantly, we are also working closely with Siemens to ensure that any system changes due on New Year’s Eve 2011 go smoothly! We should know more by the time the MOT seminars take place – come along and ask the experts.
 
Last edited:
Back
Top Bottom