Acoustic Energy Aego M 2.1 to TV

Tombles · 24 Nov 2010 at 19:25

Hi guys,

I have a Panasonic TXP46G10B and a set of Acoustic Energy Aego M 2.1 speakers that i currently use with my PC but was wondering if i could connect these speakers to my TV if i wanted as the standard speakers are not that great.

If so how would be the best way about connecting these to my TV and would i need any extra cables?

Thanks

jellybeard999 · 24 Nov 2010 at 19:29

Plug them in to the 3.5mm headphone jack on the TV.

Tombles · 24 Nov 2010 at 20:05

jellybeard999 said:
Plug them in to the 3.5mm headphone jack on the TV.

That simple? Easy enough

Cheers

kidloco · 25 Nov 2010 at 00:26

If your TV has phono audio out then I would use that. simple set of phono leads is all you will need.

Its how my dad has his panny setup with those very same speakers

a1ex2001 · 25 Nov 2010 at 13:49

kidloco said:
If your TV has phono audio out then I would use that. simple set of phono leads is all you will need.

Its how my dad has his panny setup with those very same speakers

Would do this as in theory it should give you slightly better sound but I really doubt you'll notice! Will be a massive improvement over the built in panasonic speakers which are really he only week point in there current range.

Tombles · 26 Nov 2010 at 18:20

Well I hooked them up and got them working and whilst they sound better they are not that loud even at full volume.

Do you think using the audio out would sort this?

Thanks

Mad old tory · 27 Nov 2010 at 09:53

Tombles said:
Well I hooked them up and got them working and whilst they sound better they are not that loud even at full volume.

Do you think using the audio out would sort this?

Thanks

Dumb question but have you turned up the headphone volume on the sound menu? Mine go bloody loud with both this and the actual speaker volume turned up.