Overclocking results. Are they okay?

phil128

phil128

phil128

Permabanned
Joined
5 Sep 2010
Posts
274
Location
In front of my computer
Hello. I've just finished my first watercooling setup, and i'd like to know what you think of my results. Hopefully they're okay.

4213.75Ghz @ 58 +/- 2 degrees @ 20 minutes prime 95.

Please tell me if them results seem okay.

Thanks
 
Without knowing full spec of cooling, and vcore used and what not. Its hard to say if thats excellent or about average.

But those temps are certainly with the normal you would expect from custom water, for this time of year.

So no need to worry.
 
post some screenshots up, cpu-z, prime 95, core temp or something similar, let prime run for at least 6 hours, then take temps, what system do you have, Mobo? ram? case? cooling?
 
Seraph said:
post some screenshots up, cpu-z, prime 95, core temp or something similar, let prime run for at least 6 hours, then take temps, what system do you have, Mobo? ram? case? cooling?
Click to expand...

Thanks for your reply! My system is:

Intel i7 860 2.80GHz
Asus Maximus III Extreme Intel P55 (Socket 1156) DDR3 Motherboard
Antec TruePower New Blue Modular 750W Power Supply
Corsair XMS3 4GB (2x2GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit
Coolermaster HAF-X case
Koolance cpu 360 waterblock
Koolance Asus Maximus III Extreme mobo block
6 x 140mm Enermax apolish fans
EK coolstream 420 Radiator
Lamptron fan controller.

Them temps where from prime 95 running for an hour.
I'll get my CPU + RAM voltages when I finish work ^_^.
 
I've decided to set my CPU @ 4Ghz and slowly work my way up.
I've been priming for 4 1/2 hours now. The temps are changing from 55 - 60 @ 990RPM speed.

Currently running my CPU at 182 * 22.0 multiplier
1.328 volts

I'm gonna start increasing my bus speed, with the same voltage I'm using here tonight.


So far so good ^_^
 
Last edited:
phil128 said:
I've decided to set my CPU @ 4Ghz and slowly work my way up.
I've been priming for 4 1/2 hours now. The temps are changing from 55 - 60 @ 990RPM speed.

Currently running my CPU at 182 * 22.0 multiplier
1.328 volts

I'm gonna start increasing my bus speed, with the same voltage I'm using here tonight.


So far so good ^_^
Click to expand...

Seems a good place to start doing that from temps seem ok from what I understand about this cpu. Ortho not done watercooling myself.
 
You must log in or register to reply here.
Back
Top Bottom