corsair 600t

davie77 · 6 Jan 2011 at 12:42

making a first build and need to know were you put the bunch of tgk 2510 cables theres also a biger tkg 1234 it says on it and theres a usb 3.0 dont know were any of them go , a have a sabertooth mobo and xfx blk edition 850w psu

any help would be gd :confused:

shuffle · 6 Jan 2011 at 16:02

Not really sure if I got what you were saying, but theres 4 fan connectors from the case (these have a plastic cap on them to protect the pins).

You can use these to connect fans into them (the 2 200mm fans on the case would ideally use 2 of them up, so then you can use the fan control knob to control them - dont forget to plug fan molex into PSU also).
hope this helps

davie77 · 6 Jan 2011 at 17:11

shuffle said:
Not really sure if I got what you were saying, but theres 4 fan connectors from the case (these have a plastic cap on them to protect the pins).

You can use these to connect fans into them (the 2 200mm fans on the case would ideally use 2 of them up, so then you can use the fan control knob to control them - dont forget to plug fan molex into PSU also).
hope this helps

yeh man cheers for that total beginner here just realized there caps on them lol so these go into were ? aye hooked up the 2 big fans to the mobo should aye swap them round ?

still dont know were the usb 3.0 go's thought ?

terminator2k2 · 6 Jan 2011 at 17:16

usb3 cable goes out the back of the case through one of the pcie plates, one has a piece cut out for this.....then into the usb3 port on the mother board back plate....if your main board doesnt support usb3 then just tie it up in the case.....

terminator2k2 · 6 Jan 2011 at 17:18

the wires with the caps on are from the fan controller and you can plug into these what ever fans you want the controller to control.....if you use the fan controller , make sure you plug the molex into a spare on on your psu...

davie77 · 6 Jan 2011 at 17:23

terminator2k2 said:
usb3 cable goes out the back of the case through one of the pcie plates, one has a piece cut out for this.....then into the usb3 port on the mother board back plate....if your main board doesnt support usb3 then just tie it up in the case.....

my mobo is a sabertooth x58 it has 2 usb 3.0 on bk plate but a never noticed a place that in it mounted now theres no way a can see the bk of it , is it needed that 3.0? as aye have 2 on the bk

terminator2k2 · 6 Jan 2011 at 17:38

the usb3 cable on the t600 plugs into one of the usb3 connectors on the back, its only so you can have a usb3 port on the front of your case...its like a extension cable.......if you get wat im saying

davie77 · 6 Jan 2011 at 18:03

terminator2k2 said:
the usb3 cable on the t600 plugs into one of the usb3 connectors on the back, its only so you can have a usb3 port on the front of your case...its like a extension cable.......if you get wat im saying

bit ****e that eh was thinking a had 3 usb 3.0s , but yeh a got it fitted now thanks ,still looking to see if ive missed anything before aye boot it up for first time still not got windows yet