EK H30 Supreme HF 240 WaterCooling Kit

conoflex

conoflex

conoflex

Associate
Joined
18 Oct 2002
Posts
628
Location
South Wales
I have won this kit on another forum, Is there anything else you think I need before I start my watercooling re-build ?

1 x EK Supreme HF Nickel Plexi Waterblock
1 x EK CoolStream RAD XT 240
2 x Yate Loon D12SH
1 x EK DCP 4.0 12V
1 x EK Multioption RES X2
2 x Masterkleer 3/8" ID - 1/2" OD
8 x EK PSC Nickel Compression Fittings, changing these to black
1 x EK Ekoolant UV Blue 100ml changing this for red
1 x EK DCP Pump Mounting Plate Kit
1 x TIM Arctic Cooling MX-2
 
I would ditch the coloured coolant for coloured tubing. Too much of a chance of the dye in the coolant seperating and clogging your block/pump/rad. It's not nice when this happens. Go for distilled/de-ionised water with either a silver kill coil or an addative like Primochill's Liquid Utopia.
 
pastymuncher said:
I would ditch the coloured coolant for coloured tubing. Too much of a chance of the dye in the coolant seperating and clogging your block/pump/rad. It's not nice when this happens. Go for distilled/de-ionised water with either a silver kill coil or an addative like Primochill's Liquid Utopia.
Click to expand...

Thanks I wouldn't have thought of doing that :D
 
Thanks, I've done well this year so far won 40gb Intel ssd, 50 dvdr's and this kit :D
Would like to win a new case now :D
 
Only thing i can see missing is a set of radiator brackets to mount the radiator to the back of the case.Or you could mount it in the front drive bays but doing this would loose 6 x 5.25" bays, this is assuming you are using your Lian-Li PC-P50R.

Edit.

Looking by the amount of hd's you have i would mount it to the rear of the case.
 
Last edited:
pastymuncher said:
I would ditch the coloured coolant for coloured tubing. Too much of a chance of the dye in the coolant seperating and clogging your block/pump/rad. It's not nice when this happens. Go for distilled/de-ionised water with either a silver kill coil or an addative like Primochill's Liquid Utopia.
Click to expand...

Listen to this man :)

And gratz on your win what did you have to do?
 
Amidar said:
Only thing i can see missing is a set of radiator brackets to mount the radiator to the back of the case.Or you could mount it in the front drive bays but doing this would loose 6 x 5.25" bays, this is assuming you are using your Lian-Li PC-P50R.

Edit.

Looking by the amount of hd's you have i would mount it to the rear of the case.
Click to expand...

It can be mounted in the roof as well.
Might get a new case Corsair 650D been catching my eye or 800D even cos I know someone not far away selling theirs :D
 
You must log in or register to reply here.
Back
Top Bottom