I have the H100 installed into the Corsair 600T and the sectors that light up on the H100 pump, only 2 light up even when I am running prime 95 with the core temps at 80? The pump is conected to the mobo, I would have thought the lights were showing how fast the pump was rotating and therfore when the temp goes up the pump would rotate faster? Also the center presses like a switch, is it a switch?
Anyone have the Corsair H100?
- Thread starter princejim
- Start date
I don't have one but as far as I know..
The center button is a switch, it switches between three modes with one sector being quietness to three sectors being performance (and max fan speed).
The pump speed is a constant 2000 RPM (I think) and can be checked using any fan monitoring software. Your computer will think its a fan speed but its actually pump speed.
I do also believe that the fans will still cycle up and down with speed depending on temperature (but you need to check with someone).
The center button is a switch, it switches between three modes with one sector being quietness to three sectors being performance (and max fan speed).
The pump speed is a constant 2000 RPM (I think) and can be checked using any fan monitoring software. Your computer will think its a fan speed but its actually pump speed.
I do also believe that the fans will still cycle up and down with speed depending on temperature (but you need to check with someone).
Soldato
- Joined
- 9 Mar 2009
- Posts
- 2,877
- Location
- -
the centre is a button, press it to switch between modes. The modes determine the maximum speed fans attached to the h100 will spin.
Yes it is a switch,also if you press it till the 3 lights comes on and hold it in for 5 secs it will throttle down then speed up putting it into auto mode. Hope this helps