Something better than - Yate Loon 140mm D14SH-12

pyropetepete · 10 Jul 2012 at 11:14

I have a HW Labs 560GTX, thats 20 FPI. I also have 2 30mm shourds. Noise is not an issue.

Is there anything better thna the Yate Loon 140mm - D14SH-12 i already have.

Oh there is 8 in total, push and pull

rjk · 10 Jul 2012 at 11:32

gentle typhoons.

panyan · 10 Jul 2012 at 11:41

rjkoneill said:
gentle typhoons.

+1,000,000

pyropetepete · 10 Jul 2012 at 11:46

rjkoneill said:
gentle typhoons.

panyan said:
+1,000,000

They are 120, i need 140mm

Toothy1911 · 10 Jul 2012 at 11:59

Can use 120-140 adapters. I got some 140 Bitfenix Spectre pros on my rad. They seem quite good. Expensive for 8 though

andybird123 · 10 Jul 2012 at 11:59

I've just been looking all over and high speed 140mm fans are like rocking horse poop (from PC suppliers)... about the only option I can find is Sanyo Denki's which are like £80+ each

120mm GT's 3000rpm (or almost any 3000+ RPM 120mm fan) will be higher flow (and higher noise) than other 140mm fans, they do 5000rpm GT's as well

spectre pros are only 1200rpm so I'm 99% sure that they won't be better than 2000rpm yates he has already

pyropetepete · 10 Jul 2012 at 12:07

I don't want to use plates etc.

I've found delta foa 140mmx50mm fan!! 220CFM each!!!

Speed · 10 Jul 2012 at 12:35

pyropetepete said:
I don't want to use plates etc.

I've found delta foa 140mmx50mm fan!! 220CFM each!!!

Don't forget a pair of these then:

panyan · 10 Jul 2012 at 13:16

pyropetepete said:
I've found delta foa 140mmx50mm fan!! 220CFM each!!!

remember, its static pressure your looking for - not cfm

andybird123 · 10 Jul 2012 at 13:28

panyan said:
remember, its static pressure your looking for - not cfm

I'm pretty sure a 50mm deep fan will have plenty of static pressure lol

panyan · 10 Jul 2012 at 13:39

andybird123 said:
I'm pretty sure a 50mm deep fan will have plenty of static pressure lol

im sure it will too - it was just a friendly reminder

rjk · 10 Jul 2012 at 14:58

pyropetepete said:
They are 120, i need 140mm

in that case

NZXT FZ-140 Airflow Fan Series - 140mm @ £14.99 inc VAT

NZXT proudly introduces its newest line of airflow fans, the FZ-140mm fan. The FZ-140mm fan is a perfect match for any type of chassis. It is ideal for achieving high airflow with minimal speeds of 1000 RPM. The 13 blades provide quiet operation of 24.54 dBA and high airflow of 83.6 CFM. The long-life bearing provides better reliability and extends life span surpassing 2 year warranty. This 140mm fan is the coolest solution for any enthusiast in demand of extreme airflow.

• Optimized for extreme airflow 140mm fan with minimal speeds of 1000+/- 200 RPM
• Low noise level of 24.54 dBA with exceptional airflow at 83.6 CFM
• Long-life bearing provides better reliability and extends life span surpassing 2 year warranty.

Only £14.99 inc VAT.

ORDER NOW

or

Noiseblocker BlackSilent Pro Fan PK2 Fan - 140mm @ £11.99 inc VAT

The high-quality NB-EKA Plus II drive and the almost noiseless NB-NanoSLI bearings guarantee operating noise levels which are particularly low over the long term - both equipment features which until now have only been used as part of the costlier Multiframe Reference series.

In addition to the tasteful design in matte black and mirror finish, the BlackSilentPro fans are equipped with an individually extendable cable management system and an NB-Silentframe silicone seal and installation material for vibration-free assembly without tools.

- Dimensions: 140x140x25mm
- Noise Level: 20dbA
- RPM: 1200rpm

Only £11.99 inc VAT.

ORDER NOW