Corsair Vengeance 2133Mhz 16GB kit timings for Sabertooth Z77

JoshB · 12 Apr 2013 at 16:54

Hi

I just updated my BIOS and it was also reset. I have forgotten timings to overclock RAM to 2133 using Sabertooth Z77 motherboard. I've seen a thread in here was not able to find it as there are soooo many

If anyone, could you please tell me what timings there was for overclocking

Thanks in advance.

wazza300 · 12 Apr 2013 at 17:04

are they standard 1600mhz vengeance? or 2133mhz rated?

could try 10-11-11-24-2t to start with

JoshB · 12 Apr 2013 at 17:06

wazza300 said:
are they standard 1600mhz vengeance? or 2133mhz rated?

could try 10-11-11-24-2t to start with

2133 rated

wazza300 · 12 Apr 2013 at 17:08

ahh ok,try 9-11-11-21-1t @1.65v dram,you might be able to lower dram voltage later you would need to test it,but 16gb usually needs around 1.6v

if it wont boot try with 9-11-11-24-1t

JoshB · 12 Apr 2013 at 17:09

wazza300 said:
ahh ok,try 9-11-11-21-1t @1.65v dram,you might be able to lower dram voltage later you would need to test it,but 16gb usually needs around 1.6v

if it wont boot try with 9-11-11-24-1t

thanks for pointing to the right direction

worked at 11-11-11-30-1 @ 1.55v

wazza300 · 12 Apr 2013 at 17:10

ok that's good,you can set pretty much whatever timings you want,the aim is to use as low as possible while remaining stable ect

JoshB · 12 Apr 2013 at 17:11

Thanks for advice didn't know that lower is better