Hello 
Okay, full story lol.....
my setup was an i7 2600k on an ASUS P8Z68-V LX MoBo, Hyper 212 EVO cooler in push/pull config, Enermax 85+ PSU and 16GB of Patriot ram
Now, I had foolishly wired up two case fans incorrectly, there were from my old Antec 1200 case, wasn't paying attention and used a 3 way joiner block I THOUGHT was insulated inside and it wasn't, I had joined all the wires together!!
This went into my SCYTHE Fan Controller, controlling the top, rear and front fans
I built it all up, just attached 1 SATA HD and a SATA turned it on and turned around to swig from my coffee, turned back, plumes of smoke!
Pulled the plug, nearly burst into tears, went and had a fag, came back and accessed the damage
Wiring to the fans melted off and it got so hot it actually melted the internal wires in two places
Scythe fan controller smelt, and I simply stripped everything out, ordered new fans, and when they arrived, built it all again correctly.....
Now, the problem!
The Fan controller it turns out, apart from smelling a little, works fine, the heat had melted the one controller wire going into it, but I only needed three out of the four available so I simply removed the damaged one
Having rebuilt it all, and powering it all on, the fans started up, GREAT I thought... but then nothing.... not beeps, no display on the monitor, nothing
Thought I MIGHT have fried the PSU, so went out and brought a Corsair 800W one, and decided to bench test it all this time so pulled it all apart yet again, nothing attached this time though, JUST the ram installed, and the CPU, and the Cooler
so... nothing again, well tell a lie, the PSU powers on, the CPU fan starts, then it all shuts off, runs for like 2 or 3 secs only
Tried removing all the ram, and then just doing two sticks, same thing, nothing
Got an EXACT replacement Motherboard, BRAND NEW, fitted it with RAM and CPU, same thing again
I cannot believe it, but I think the i7 2600k is fried
it COULD be the memory, but I doubt it, all 4 sticks? Nothing happens when I leave the memory out, so I dont think it is that
So, what now???
Have I tried everything there is to try??
Looks like I need to renew, and I have been given a budget of £500 - £600 MAXIMUM, this is for a New CPU, MoBo and Ram
I liked the 2600K because it was suppose to be nice and easy to overclock it, not that I got that far!!
So, could you spare five mins to maybe spec me a fairly decent Combo for that price range??
Many Thanks
Chris

Okay, full story lol.....
my setup was an i7 2600k on an ASUS P8Z68-V LX MoBo, Hyper 212 EVO cooler in push/pull config, Enermax 85+ PSU and 16GB of Patriot ram
Now, I had foolishly wired up two case fans incorrectly, there were from my old Antec 1200 case, wasn't paying attention and used a 3 way joiner block I THOUGHT was insulated inside and it wasn't, I had joined all the wires together!!
This went into my SCYTHE Fan Controller, controlling the top, rear and front fans
I built it all up, just attached 1 SATA HD and a SATA turned it on and turned around to swig from my coffee, turned back, plumes of smoke!
Pulled the plug, nearly burst into tears, went and had a fag, came back and accessed the damage

Wiring to the fans melted off and it got so hot it actually melted the internal wires in two places
Scythe fan controller smelt, and I simply stripped everything out, ordered new fans, and when they arrived, built it all again correctly.....
Now, the problem!
The Fan controller it turns out, apart from smelling a little, works fine, the heat had melted the one controller wire going into it, but I only needed three out of the four available so I simply removed the damaged one
Having rebuilt it all, and powering it all on, the fans started up, GREAT I thought... but then nothing.... not beeps, no display on the monitor, nothing
Thought I MIGHT have fried the PSU, so went out and brought a Corsair 800W one, and decided to bench test it all this time so pulled it all apart yet again, nothing attached this time though, JUST the ram installed, and the CPU, and the Cooler
so... nothing again, well tell a lie, the PSU powers on, the CPU fan starts, then it all shuts off, runs for like 2 or 3 secs only
Tried removing all the ram, and then just doing two sticks, same thing, nothing
Got an EXACT replacement Motherboard, BRAND NEW, fitted it with RAM and CPU, same thing again

I cannot believe it, but I think the i7 2600k is fried

it COULD be the memory, but I doubt it, all 4 sticks? Nothing happens when I leave the memory out, so I dont think it is that
So, what now???
Have I tried everything there is to try??
Looks like I need to renew, and I have been given a budget of £500 - £600 MAXIMUM, this is for a New CPU, MoBo and Ram
I liked the 2600K because it was suppose to be nice and easy to overclock it, not that I got that far!!
So, could you spare five mins to maybe spec me a fairly decent Combo for that price range??
Many Thanks
Chris