***The Vapers Lounge***
- Thread starter Devrij
- Start date
- Status
I would get the kit with the nitecore charger (much better) and 2 18650 batts instead of the 18350s
Thanks mate
Those 18650 batteries supplied are Sony ones as opposed to Panasonic ones that people recommended, would Sony ones will be more than suitable?Liam
Dingo with a DID - I have it at 1.3 Ohms atm i want to do another coil later and make it lower.
One thing with metal sleeve is how the hell do i know when its low xD. I need to get a needle to attach to my syringe so i can unfill and refill knowing how much is in there.
Looking good, Pyrex is your answer, nothing worse than going out armed with a spare battery and then running out of juice.
I run my DID with a .8 Ohm coil three wraps of ribbon, not entirely sure what grade it is tho
All my juice at the moment is VG 5% Vodka, clouds of vaper
Last edited:
Associate
- Joined
- 14 Oct 2009
- Posts
- 1,938
- Location
- Rotherham. S.Yorks
received my vamo wrap today from scrumpy jack at uk vapers, looks brilliant and is much better to hold, no more fingerprint magnet. What do you guys think?
received my vamo wrap today from scrumpy jack at uk vapers, looks brilliant and is much better to hold, no more fingerprint magnet. What do you guys think?
I think you need to get your self a decent mechanical mod to put that beautiful spheroid on
Looks ok Dude
Thanks mate
Liam
The Sony 18650s are just as good (maybe better) as the Panasonic but not as common. They have a much higher drain than most batteries which doesn't matter for you but is good for people using mech mods with sub ohm coils.
Thanks mate
Liam
They'll be fine. You may find after a while that they aren't as able to cope when they are running low, but I go through 2 18350s in a day easily, whereas one 18650 lasts me all day. I do like the small form factor, but I couldn't use them every day. More of a night out thing for me. Besides, you can always pick up more!
Nobody have an opinion on these?
I have the ATTY and the RSST. Both very good genesis atomisers.
The mech mod you linked to looks like something from a plumbers merchants. Look for the SMOK Magneto clone, that is only something like £15 with a magnetic button. The Ithaka clone is getting good write ups too.
Soldato
- Joined
- 25 Apr 2010
- Posts
- 5,298
- Location
- Ipswich
[/SPOILER]
Looking good, Pyrex is your answer, nothing worse than going out armed with a spare battery and then running out of juice.
I run my DID with a .8 Ohm coil three wraps of ribbon, not entirely sure what grade it is tho
All my juice at the moment is VG 5% Vodka, clouds of vaper
Maybe I should try Ribbon instead of normal wire I have a 1 Ohm coil now after recoiling much nicer to vape
this draw on the DID is epic.
Associate
- Joined
- 14 Oct 2009
- Posts
- 1,938
- Location
- Rotherham. S.Yorks
[/SPOILER]
I think you need to get your self a decent mechanical mod to put that beautiful spheroid on
Looks ok Dude
i would love to mate but i just cant warrant spending the money on one, the spheroid cost a lot and the vamo is great for the money. i have got these on the way from fasttech
http://www.fasttech.com/products/0/10005379/1435100-bagua-mech-mod-e-cigarette-battery-compartment
http://www.fasttech.com/products/0/10004594/1370201-innokin-itaste-svd-telescoping-variable-voltage-e
Very informative, many thanks again mate
Could you recommend me the best clearomizers to use with these Vamo's as well?
Cheers - Liam
Ha ha, only kidding mate, the bagua copy looks pretty good and I'm sure it will work well enough, I do think the Chinese copies lack the quality tho!
Maybe I should try Ribbon instead of normal wire I have a 1 Ohm coil now after recoiling much nicer to vape
Can't help but love the DiD. No hot spots?
Associate
- Joined
- 14 Oct 2009
- Posts
- 1,938
- Location
- Rotherham. S.Yorks
liam i think the kanger protank is a perfect match, here is a pic of how well they match
Associate
- Joined
- 14 Oct 2009
- Posts
- 1,938
- Location
- Rotherham. S.Yorks
i dont think it will be a patch on the quality of a real one obviously but its available to get hold of and the real ones arent and its only 15 quid rather than upwards of 150 lol. have you seen the new chi you copy, it looks great
http://www.fasttech.com/products/0/10005381/1429800-e-cigarette-mod-battery-compartment
Last edited:
Soldato
- Joined
- 25 Apr 2010
- Posts
- 5,298
- Location
- Ipswich
None at all - I rolled a twisted coil then did 3 slash 4 wraps with that and its glowing nice and even - I could probably roll a better one if i put some more time into it.
Right now its vaping nice and smooth with a good throat hit and flavour. The airhole is nice and open as its been drilled out a bit
I still want lower ohms haha.
Soldato
- Joined
- 25 Apr 2010
- Posts
- 5,298
- Location
- Ipswich
FYI Scorch the difference between using a Mech mod like the dingo and the vamo is huge. It just feels so much better the quality of the vape feels a little diff to due to being unregulated.
You dont need to spend as much as I did you could get a siglei 19e which is a nice mech mod for less then £40 which has brass contacts and a nice button and works just as good as the dingo i reckon.
What I am paying for is the size mostly and quality of machining.
You dont need to spend as much as I did you could get a siglei 19e which is a nice mech mod for less then £40 which has brass contacts and a nice button and works just as good as the dingo i reckon.
What I am paying for is the size mostly
and quality of machining.liam i think the kanger protank is a perfect match, here is a pic of how well they match
Thanks Scorchisio, I had a feeling that the Kanger would be the ideal match
Liam
- Status