***The Vapers Lounge***

Status
Not open for further replies.
smokedog said:
Wow... That's an extremely good price, its cheaper than Fasttech.
Click to expand...

That's why I coudn't resist!

RedMogg said:
Jester Juice by Vaping King is a fruity juice with a menthol type exhale.
Also Snake Oil by www.tmax-juices.co.uk is incredible!
Click to expand...

Jester Juice is in my basket for my next order, I looked at the Snake Oil as well but I'm a bit worried that you can only buy it in 30ml bottles. It's a lot to waste if I don't like it.
 
Nice looking coil and wick VR, wish i could get mine to look as nice as that lol.

Saying that i re-did my coil and wick a couple of nights ago at 2.4ohms, think i did 4 wraps on 2mm ekowool with 32awg kanthal and its working perfectly fine. Finally managed to get it right in the end after so much fustration.

Need to change juices as ive ran my KFL dry now but i dont want to re-coil and wick again as i know ill end up messing it up and therefore ill be sat in fustration trying to get it right lol.
 
Vampyre said:
That's why I coudn't resist!



Jester Juice is in my basket for my next order, I looked at the Snake Oil as well but I'm a bit worried that you can only buy it in 30ml bottles. It's a lot to waste if I don't like it.
Click to expand...

Simon sends out 5 or 10 ml sample bottles if you cover the 90p postage or he may even just send it free. Drop him a PM on UKV or email him through his website. Really nice chap.
 
lmao read the Youtube comments Todd is arguing with this Yank's video

http://www.youtube.com/watch?v=F0qDYuWqcdM#t=350

I'm with Todd on this one. Sometimes these reviewers purposely bash these clones in an attempt to persuade you that they are crap. So why do they buy them in the first place if they are against them? I've argued this point so many times and the only respectable answer I got was from Scott who doesn't review or accept any even for free to review.

Anyway.......lol

I asked if any OCUK'er had one of these a while back and didn't get an answer so I might just get the V2 one of these whilst I wait on the Rose - It does look the part. Glass tank, large enough building chamber, air control, adjustable centre pin. A ceramic cup would have been good though.
 
majnu said:
Simon sends out 5 or 10 ml sample bottles if you cover the 90p postage or he may even just send it free. Drop him a PM on UKV or email him through his website. Really nice chap.
Click to expand...

Thanks for the info, I decided to man up and just buy 30ml, it sounds delicious from the description so I'm sure it'll be fine!
 
20131013_144514.jpg

Free to a good home. I personally don't like them but someone else might. Collection from Stoke. I would ask in return for a vape on your fave juice to see what it's like ;)
 
RedMogg said:
Jester Juice by Vaping King is a fruity juice with a menthol type exhale.
Also Snake Oil by www.tmax-juices.co.uk is incredible!
Click to expand...
I quite like Jester Juice, it reminds me of refreshers. The menthol exhale you speak of tastes more fizzy to me!


RedMogg said:
Tidy - but make sure that right hand end coil isn't touching the post.
The general rule (apologies for egg-sucking lesson) is: the thicker the wire (or lower AWG number) or the fewer turns in a coil, the lower the resistance...
The sweet spot I find is 1.3 Ohms, a Vamo has a 1.2 ohms minimum limit.
Depending on the Amp rating of your battery, you can go below 1.0 ohm on a mech mod - but anything under 0.8 is pushing your luck.
Click to expand...
No apologies needed. Yeah I keep trying to keep the coil at right angles to the posts but everytime i tighten them it pulls the wick round. Cant get the hang of stopping it doing that! :mad:

I'm still trying to workout what i can get from what wire/coil combo. My preferred resistance seems to be about 1.6-1.8ohm's, so trying to hit that sometimes takes a few goes. I still think the first one i did was the best for flavour, 2mm eko and .2 Kanthal, gave me 1.7 exactly. (I forget how many turns it was, 3 or 4 maybe?)


Yas786 said:
Nice looking coil and wick VR, wish i could get mine to look as nice as that lol.

Saying that i re-did my coil and wick a couple of nights ago at 2.4ohms, think i did 4 wraps on 2mm ekowool with 32awg kanthal and its working perfectly fine. Finally managed to get it right in the end after so much fustration.

Need to change juices as ive ran my KFL dry now but i dont want to re-coil and wick again as i know ill end up messing it up and therefore ill be sat in fustration trying to get it right lol.
Click to expand...
I did a coil at about 2.4ohm's and found it a bit lacking, its funny I seem to have to pump far more watts thought the KFL than i did/do the KPT's, if i tried to vape the PTs at what i am with the KFL it would probably combust lol.


Next time i recoil it, I'm giving this a go...



Also, Snake Oil, Didn't like it in the protanks, wonder if it would be better in the KFL...?
 
Yep im thinking about trying for at least 1.8ohms as 2.4 really isnt doing it for me. Problem is last time i got 1.8 ohms, i ended up with a lot of burnt taste on my kfl lol.

Will have to try it again tonight when i get a few moment to myself ie get rid of the missus as no doubt she wants me to do a few jobs around the house today.
 
just thought i would let u guys know that the nemesis clone is so fantastic i have ordered a real one out of sheer appreciation and respect of it, if money is tight get a clone its worth the wait. If you have a spare £135 then get one its the finest device i have ever used and i have tried loads.
 
scorchisio said:
just thought i would let u guys know that the nemesis clone is so fantastic i have ordered a real one out of sheer appreciation and respect of it, if money is tight get a clone its worth the wait. If you have a spare £135 then get one its the finest device i have ever used and i have tried loads.
Click to expand...

Scorch I thought the clone was better than the Original. Just sayin' :p

I decided to get one for my brother now along with the Fogger v2, I'll keep the microstick for myself when it arrives, he'll only end up loosing it. :(

One thing I might do is see if magnets from atmomixani will work in them.
 
majnu said:
lmao read the Youtube comments Todd is arguing with this Yank's video

http://www.youtube.com/watch?v=F0qDYuWqcdM#t=350

I'm with Todd on this one. Sometimes these reviewers purposely bash these clones in an attempt to persuade you that they are crap. So why do they buy them in the first place if they are against them? I've argued this point so many times and the only respectable answer I got was from Scott who doesn't review or accept any even for free to review.

Anyway.......lol

I asked if any OCUK'er had one of these a while back and didn't get an answer so I might just get the V2 one of these whilst I wait on the Rose - It does look the part. Glass tank, large enough building chamber, air control, adjustable centre pin. A ceramic cup would have been good though.
Click to expand...

Shouldn't of watched that video, now I need to buy a Fogger V2. I'm a sucker for bottom coil attys. Anyone know where I can get one from? Fasttech doesn't have them in stock.
 
Last edited:
Question regarding vamo modded to take 18650 batteries. I understand 18650's come in various voltages. Does it matter what battery voltage one chose for vamo?
 
v0n do u mean amperage? eg. 2900mah or 3100mah. normally the higher one will last longer, but any of them will be fine for the Vamo
 
I mean fasttech seems to have 18650ies in 3.6V, 3.7V and over 4.2V variations. They also sometimes list various discharge amperage to complicate matters furher. There is also choice of flat top, button top and full range of internal resistance values.
 
Last edited:
scorchisio said:
just thought i would let u guys know that the nemesis clone is so fantastic i have ordered a real one out of sheer appreciation and respect of it, if money is tight get a clone its worth the wait. If you have a spare £135 then get one its the finest device i have ever used and i have tried loads.
Click to expand...
Sod it, for 18 quid I've gotta give it a go. My first mech! :D

Just to confirm, it is this one right!?
http://www.fasttech.com/product/1448300
 
Status
Not open for further replies.
Back
Top Bottom