***The Vapers Lounge***

Status
Not open for further replies.
How much are you selling those for?

I'll be in touch buddy, but things are a little hectic at home - I'll email you :)

Red Mogg, interested in lending or selling me that RSST Reducer so I can have a play with my setup?

I wouldn't normally have issue, but I'd rather it stayed with the whole setup, as it really does make *that much* of a difference to the vape.

If you already have an RSST, buy the Fusion Mods version - it's less than half the price of the JB Steamworks version (iirc £10 as opposed to £23) and doesn't affect the fill hole. I need to modify the fill hole pin in the JB Steamworks Chamber Reducer, as it forces juice to leak across the top deck, rather than into the tank, even when using a syringe & needle to fill...
 
I'll be in touch buddy, but things are a little hectic at home - I'll email you :)



I wouldn't normally have issue, but I'd rather it stayed with the whole setup, as it really does make *that much* of a difference to the vape.

If you already have an RSST, buy the Fusion Mods version - it's less than half the price of the JB Steamworks version (iirc £10 as opposed to £23) and doesn't affect the fill hole. I need to modify the fill hole pin in the JB Steamworks Chamber Reducer, as it forces juice to leak across the top deck, rather than into the tank, even when using a syringe & needle to fill...

Thank you for that, seems I may also be getting the hybrid kit for my Bremesis when it arrives...
 
Need some help again, getting a bit fed up with my iTazsteVV, the battery doesn't last all that long it seems to be honest and the clearomizer is a tad small, certainly not lasting me on nights out the battery.

I have around ~£100 to play with, anyone able to point me in the right direction? Quite a few larger ones posted in here that are very nice looking although require a lot more tinkering although I'd be up for learning to get something that is a bit more quality.
 
Need some help again, getting a bit fed up with my iTazsteVV, the battery doesn't last all that long it seems to be honest and the clearomizer is a tad small, certainly not lasting me on nights out the battery.

I have around ~£100 to play with, anyone able to point me in the right direction? Quite a few larger ones posted in here that are very nice looking although require a lot more tinkering although I'd be up for learning to get something that is a bit more quality.

Do you still need VV/VW?
Because the point to recoiling and Mechanical Mods is that you tailor the resistance of the coil to the 4.2V that a fully charged battery gives out (and then drops as it discharges )... You can use a Kick insert to select a specific Wattage, which then takes care of the battery - provided it's within the realms of physics and possibility...

I'd say look at an Aspire BDC with a v5 Vamo, or MVP v2.
Do you have a decent charger and batteries?
 
I don't think so, I run the ITazste at max voltage which is 4.2 iirc?

No I wouldn't have either unfortunately, the iTazste was my first ecig and it is charged via mini usb.

Where do you find the ones like Redmogg has above out of curiosity, they look rather nice

EDIT: I know aesthetics probably shouldn't matter with these things but I would rather like a decent looking one, like the look of this although I'm not really clear on how you use the tank as I've only used clearomizer, is it fairly obvious with the instructions once you have it in hand?
 
Last edited:
I don't think so, I run the ITazste at max voltage which is 4.2 iirc?

No I wouldn't have either unfortunately, the iTazste was my first ecig and it is charged via mini usb.

Where do you find the ones like Redmogg has above out of curiosity, they look rather nice

EDIT: I know aesthetics probably shouldn't matter with these things but I would rather like a decent looking one, like the look of this although I'm not really clear on how you use the tank as I've only used clearomizer, is it fairly obvious with the instructions once you have it in hand?

Pretty much, i think if im not mistaken you fill the cartomiser with liquid which has a filler material in it ie some kind of wool and it just soaks up the juice. Ive never used one myself but i imagine once the taste and vapour die out, you then replace the cartomiser with more liquid.
 
Need some help again, getting a bit fed up with my iTazsteVV, the battery doesn't last all that long it seems to be honest and the clearomizer is a tad small, certainly not lasting me on nights out the battery.

I have around ~£100 to play with, anyone able to point me in the right direction? Quite a few larger ones posted in here that are very nice looking although require a lot more tinkering although I'd be up for learning to get something that is a bit more quality.

Second Hand might be a stretch with your budget but it's entirely up to you if you want to go down the FT route or save some more cash:

Nemesis with magnets
Kayfun Lite Plus with Nano ring kit
Hybrid kit
Drip Tip
Batteries from Torchythebatteryboy or AW IMR's
Efest Luc Charger or Nitecore intelli-charger

If you want a small stealthy setup then:

Microstick
Spheroid
Drip tip
AW IMR's
Efest Luc Charger or Nitecore intelli-charger

Buy one of Redmogg's microcoiling kits for either setup and job done.
 
Cheers Yas :)

Any input on whether that Magneto mod is any good/worth the money?

Second Hand might be a stretch with your budget but it's entirely up to you if you want to go down the FT route or save some more cash:

Nemesis with magnets
Kayfun Lite Plus with Nano ring kit
Hybrid kit
Drip Tip
Batteries from Torchythebatteryboy or AW IMR's
Efest Luc Charger or Nitecore intelli-charger

If you want a small stealthy setup then:

Microstick
Spheroid
Drip tip
AW IMR's
Efest Luc Charger or Nitecore intelli-charger

Buy one of Redmogg's microcoiling kits for either setup and job done.

Sorry I'm a bit thick at this, I'm taking it this is literally building your own, as in not just taking the battery part and sticking it on a clearomizer/cartomizer :p

Might go with something a bit simpler below £100 for now and save up like you said, just getting a bit fed up with my itazte but still want something aesthetically pleasing.

Also any recommended alternatives to GVC?

Also for cleaning clearomizers do you just rinse it out and dry burn for a bit (what I got from youtube.) As I've used all five now and could do with cleaning one haha
 
Last edited:
Just ordered some Joose Juice menthol. Also looking for a good price on some Protank heads if anyone has any pointers.

I've a local store that do five for a tenner which I think is a little steep, though I should probably buy them there to help the business.
 
Papa i just ordered a few days ago 25 protank heads from fasttech, worked out to about £25 all in.

These are the ones i got: http://www.fasttech.com/search?kanger protank heads

The ones i got were the 1.8ohm heads which are sold out unless you go for the 1.5ohm or 2.5ohm heads.

As its from fasttech, it will take a few weeks i imagine before it gets to me...got an email yesterday saying they have been dispatched so hopefully might get them before xmas but i doubt it. In the meantime ive got about 15 left over from a previous order from a few mths back.
 
Cheers Yas :)

Any input on whether that Magneto mod is any good/worth the money?



Sorry I'm a bit thick at this, I'm taking it this is literally building your own, as in not just taking the battery part and sticking it on a clearomizer/cartomizer :p

Might go with something a bit simpler below £100 for now and save up like you said, just getting a bit fed up with my itazte but still want something aesthetically pleasing.

Also any recommended alternatives to GVC?

Also for cleaning clearomizers do you just rinse it out and dry burn for a bit (what I got from youtube.) As I've used all five now and could do with cleaning one haha

Not sure on the magneto, am sure someone will chime in.

As for alternatives to GVC??, well the one i use now that ive run out of it is kings custard from vaping king...pretty similar to GVC but not quite. Perhaps get a 10ml bottle to see if you get on with it??.
 
Ive got a few ml left of the Kings custard so if you want me to send you out some then send me a trust message with your address and ill get it sent out to you tomo, if you can trust me your address Purdy.

Save yourself a few quid in case you dont like it etc.
 
Sent trust, very kind of you :) Vaping King site down as well atm due to 'illness' so thanks for that :)

EDIT : Trust me your PP back and I'll cover the postage if you like
 
Nope ive not tried it to be honest, ive seen people rave about it in reviews and what not, but never actually taken the plunge and tried it.

You have to try the Cigarillos, seriously the best vape by a country mile. I get lush natural sweetness of a high quality tobacco, just streets ahead of anything else.
That Navy Cut RedMogg linked does sound nice though, the description reminds me of Boba's Bounty's flavour.

Seriously get back to me after trying the Cigarillos, if you do not like it I will buy it from you at cost.
 
Cheers Yas :)

Any input on whether that Magneto mod is any good/worth the money?



Sorry I'm a bit thick at this, I'm taking it this is literally building your own, as in not just taking the battery part and sticking it on a clearomizer/cartomizer :p

Might go with something a bit simpler below £100 for now and save up like you said, just getting a bit fed up with my itazte but still want something aesthetically pleasing.

Also any recommended alternatives to GVC?

Also for cleaning clearomizers do you just rinse it out and dry burn for a bit (what I got from youtube.) As I've used all five now and could do with cleaning one haha

Magneto clone with Protank in 18650 mode, this is my first go at mech mods, I have micro coiled the tank with 7 coils of 0.25 kanthal which is producing approx 1.8ohms. Considering its my first go, the thing is firing ok with decent vapor and flavour, though I do think that the Protank is holding it back a bit and am currently looking for something better to replace it with.

The quality of the Magneto seems pretty good though I cant compare it to anything with it being my first mechanical device.

This setup cost me:

£20 for the Magneto (Ebay)
£10 for the Protank
£13 for a Xtar charger
£10 for 2 x efest 18650 batteries

Around 5 quid for the wire and stuff for re-wicking, so mechs dont have to cost the earth :D





Magneto clone I posted a while back, works fine with protank but I have since upgraded to a Nimbus which takes a bit of knowledge to set up but the above post gives you an idea od what you can expect to pay as a minimum for a mech mod. try Ebay as this is where I bought all the stuff listed above.
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom