Tube diameters...

Guru · 13 Feb 2014 at 11:50

Hi all,

I'm trying to buy some hose/tubing to connect to an Aqua Zonic powerhead.

I have measured the plastic tube it will be connecting to and it's 12mm inside and 15mm outside diameter.

I need to buy a 2-3m length of hose/tube to snuggly attach to this unit, but I can't decide on the diameter of the hose.

IF I get hose that is 15mm inside, will it just slip on an off? I was considering hose with 12mm in 15mm out, but don't know if this will be able to be pushed onto the powerhead or if it will be too tight.

Any one any more clued up than me on this?

Thanks,

G

Windle · 13 Feb 2014 at 11:56

12mm ID / 15mm OD. If it's plastic you get a bit of flex to work with on the OD.

twist3d0n3 · 13 Feb 2014 at 12:18

is the aqua zonic powerhead some sort of bj machine?

Guru · 13 Feb 2014 at 12:34

twist3d0n3 said:
is the aqua zonic powerhead some sort of bj machine?

Yes, but I need the hose to be a perfect fit for my wang so I hope 12mm will be tight enough.

Guru · 13 Feb 2014 at 12:35

I don't want any liquid leaking out on the carpet.

Guru · 13 Feb 2014 at 12:36

Windle said:
12mm ID / 15mm OD. If it's plastic you get a bit of flex to work with on the OD.

Thanks

panthro · 13 Feb 2014 at 13:02

f you match 12mm ID to 12mm ID then this will be fine as stated previously, there is room for movement in flexible plastic hosing. Use a cable tie or hose clip to keep it on if you're worried about it coming off.

Guru · 13 Feb 2014 at 13:03

Thanks for the replies...

Went for this

pvc clear pipe,flexible,plastic hose pipe,fish pond,airline 12/15mm ID/OD(2m)