Find me a.... whatever this is

[kindai]

I need a large hollow ring, but with a square profile, in clear acrylic/perspex/glass. About 1 meter diameter, and about 1 inch profile.



Anyone got even the slightest idea where to start?

 

[cheesyboy]

You building a novelty toilet seat?

 

[Luke]

Maybe 10 of these!
http://www.argos.co.uk/static/Product/partNumber/1280609.htm

 

[GhostlyPea]

Maybe get one custom cut? Homebase/B&Q around my way used to sell sheets of similar materials and cut them on site

- GP

 

[MikeTheNative]

You don't need to build your own these days, fleshlight already make what you are after.

 

[russell664]

+1 to the above.

 

[Mynight]

You don't need to build your own these days, fleshlight already make what you are after.

Giving him a bit too much credit there .

 

[bitslice]

Chances are this isn't what you want, it's just what you think you need.

rewind and describe the actual problem, it saves time

 

[Sankari]

I need a large hollow ring, but with a square profile, in clear acrylic/perspex/glass. About 1 meter diameter, and about 1 inch profile.



Anyone got even the slightest idea where to start?

Slippery Neville's Adult Novelties (Birmingham branch). Ask for Herb and tell them I sent you.

 

[MikeTheNative]

Giving him a bit too much credit there .

I imagine a home-made one would not be as compact as a pre bought one... not that I've tried or anything.

 

[Mynight]

I imagine a home-made one would not be as compact as a pre bought one... not that I've tried or anything.

a 1 metre diameter would be quite impressive .

Maybe they're getting into hula hooping .

 

[kinobestew123]

I very much doubt anywhere is going to sell a 1m square of Perspex 1 inch thick with a hole ready cut into it just on the offchance that somebody needs one. You'll need it custom making.

 

[Cosimo]

One has to surmise that OP is wanting this ring for something kinky...

 

[bJN]

Find a sheet of 1m x 1m x 1" perspex, purchase, and take to a local company to cut to shape for you?

 

[RDM]

The mix of imperial with metric measurements is an abomination...

 

[asim18]

I need a large hollow ring, but with a square profile, in clear acrylic/perspex/glass. About 1 meter diameter, and about 1 inch profile.



Anyone got even the slightest idea where to start?

A CAD drawing of what you're after would be a good place to start. It sounds simple enough that you don't even need CAD, just a quick pencil diagram with measurements.

Then you need to find a fabrication/machining company, preferably one that has CNC machinery.

Here's a couple I found using Google who work with acrylic.:
http://london-cnc-routing.co.uk/
http://www.carvilleplastics.com/acrylic-machining/

Search for acrylic machining + your location.

Also, as above, don't interchange imperial and metric otherwise they will add an extra 25% surcharge. In fact don't even interchange millimetres with centimetres on the same drawing. Just state all measurements in millimetres.

 

[kindai]

Whys switching between them so hard, 1 inch = 25.4 mm

Anyway. Thanks for recommendations on the sex shops.

Would any of them have a 10 litre bottle of lubricant?

 

[Kuros]

http://www.amazon.com/Passion-Natural-Water-Based-Lubricant-Gallon/dp/B005MR3IVO Here you go, (although not sure if links to the rainforest are allowed, even if it is something that OCUK will never sell)

 

[asim18]

Whys switching between them so hard, 1 inch = 25.4 mm

Because imagine you were the guy who's dayjob it was to input measurements. If everyone interchanged units of measurement which forced you to spend time doing mundane conversions which take longer than inputting the actual figure, sooner or later you would want to kill yourself.

 

[Kosmiche]

http://www.amazon.com/Passion-Natural-Water-Based-Lubricant-Gallon/dp/B005MR3IVO Here you go, (although not sure if links to the rainforest are allowed, even if it is something that OCUK will never sell)

Ah thanks I was looking for some bulk fap lube