nzxt h440 ? whats your thoughts

I mounted on the back and moved the 140mm fan to the top, How ever need to work out what way there blowing (case fans) as i left them the way they came from factory, My thoughts is 3 front fans pushing cold air into the case, h80i as pull cold air through the rad and push out the back, Not too sure on the roof 140 is it worth having as push cold air in?
 
Have 3 at the front pulling in, then the rear and top exhausting. Should be fine.

I've got 2 140's pulling in and then 3 SP120's running really low exhausting.
 
My MS Paint skills aren't what they used to be, but I would set it up like this:

ui4ET18.jpg


I forgot to label it but leave the h80i at the back.

The H440 needs all the air going into it that you can IMO

Cb
 
Thanks :D my temps with my i5 4670k idle last night was around 34degrees little higher that what it used to be in my old case
 
Temps will always be a bit higher in the case, setting up the fan as I suggest should help that temp come down a bit. But ultimately its always going to be well within safe limits of the hardware. I came from a very open PC case with super cool temps, but louder fans, to my H440 with slightly higher temps, but I would take that trade any day as the H440 looks so good, and is so much quieter than my previous case
 
Biomorphs said:
Temps will always be a bit higher in the case, setting up the fan as I suggest should help that temp come down a bit. But ultimately its always going to be well within safe limits of the hardware. I came from a very open PC case with super cool temps, but louder fans, to my H440 with slightly higher temps, but I would take that trade any day as the H440 looks so good, and is so much quieter than my previous case
Click to expand...

Yeh agree with you, It is a beautiful yet simple case, I need to get some extra braided cabled and tidy the ones on the back a little more as they seem cramped against the back panel, One thing i did noticed it does have a bit of weight behind it lol
 
Biomorphs said:
Yeah the H440 is all business up front:
4Gel4ue.jpg

and a mess at the rear!
3LysNzO.jpg.png

And +1 on the weight of the dam thing when its all fully loaded!
Click to expand...

Yeh Its a heavy beast, I have taken out the extra caddys and the front filter :D And i am going to order on ebay a new plexi glass section to remove the nzxt from the psu shroud to match my business name. (maybe or something else)
 
When i get home tommorow i might put my 2x 2500rpm ek vardar 140mm's asintakes from the top & 3 x ek vardar 2200rpm 120's n the front see if i can max out the cold air comming in. Atm cpu and gpu both go to the 70's when gaming
 
You must log in or register to reply here.
Back
Top Bottom